症状为：一开始还好，大约两到三次关机再起后，HDMI无法输出音频，尝试过重新安装最新的格兰菲驱动程序，依旧如此。

现在图中这个选项，点击没有任何反应：

以arise为关键字的dmesg日志内容为：

[ 12.146875] arise: loading out-of-tree module taints kernel.
[ 12.146894] arise: module verification failed: signature and/or required key missing - tainting kernel
[ 12.151180] arise info: Glenfly Tech Co., Ltd.
[ 12.151188] arise info: Version: 25.00.55 Build on: 04/15/2026
[ 12.151540] arise 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
[ 12.151551] arise info: gf_init_procfs_entry() name-driver/dri0, procfs_entry-0x8609a840
[ 12.151576] arise info: bus_command: 0x147, device id: 0x3d07
[ 12.251685] arise info: glb_init_chip_id() debugfs_mask-0x1
[ 12.251691] arise info: init engine power status: 0xff
[ 12.464763] arise info: disp cbios_init_hw finished.
[ 12.464771] arise info: bios supported device: 0x18001
[ 12.464775] arise info: low_top_address : 0x0
[ 12.464792] arise info: disp_cbios_get_slice_num: get slice_num: 4, efuse enable slice: fff
[ 12.464796] arise info: final slice mask:f
[ 12.464800] arise info: use total_mem_size_mb as local memory
[ 12.464802] arise info: video memory size: 4096M.
[ 12.464805] arise info: video unav size: 0M.
[ 12.464807] arise info: krnl_update_adapter_info chip_slice_mask: 0xf
[ 12.464810] arise info: CRTC num: 3.
[ 12.464812] arise info: To turn off igas and devices.
[ 12.727632] arise info: Create property for dev 0x1, primary = 1, pci_id = 0x67663d07, internal_id = 0x1000001.
[ 12.727666] arise info: Create property for dev 0x8000, primary = 1, pci_id = 0x67663d07, internal_id = 0x1000080.
[ 12.727692] arise info: Create property for dev 0x10000, primary = 1, pci_id = 0x67663d07, internal_id = 0x1000100.
[ 12.775483] arise info: disp cature init enter
[ 12.775487] arise info: disp cature init out
[ 12.775491] arise info: displayinfo Vbios Version:1a.11.00.26
[ 12.775495] arise info: displayinfo PMP Version:PM00250I Build Time:Nov 19 2024 09:58:19
[ 12.775497] arise info: displayinfo Driver Version:25.00.55
[ 12.775500] arise info: displayinfo Driver Release Date:04/15/2026
[ 12.775502] arise info: displayinfo FB Size:4096 M
[ 12.775505] arise info: displayinfo Chip Slice Mask:0xf
[ 12.775507] arise info: displayinfo MIU channel num:2
[ 12.775512] arise info: displayinfo Coreclk:1300MHz
[ 12.775518] arise info: displayinfo Mclk:1600MHz
[ 12.775522] arise info: found audio device, devfn = 0x1
[ 12.775529] arise info: GPU can used system memory size: 16240032k. set GPU max used size as: 16043424k.
[ 12.775533] arise info: add extra paging segment size:4096 MB
[ 12.775538] arise info: segment[1]: range: [0M -> 512M], size: 512M, start reserved: 0k
[ 12.775542] arise info: segment[2]: range: [4096M -> 12288M], size: 8192M, start reserved: 0k
[ 12.775548] arise info: segment[3]: range: [12288M -> 16384M], size: 4096M, start reserved: 0k
[ 12.775557] arise info: segment[4]: range: [512M -> 4096M], size: 3584M, start reserved: 0k
[ 12.775569] arise info: dummy page phys addr 4000
[ 12.779103] arise info: reg_Mxu_Dec_Ctrl.uint 0x8 readvalue: 0x8
[ 12.779108] arise info: bl_buffer: gpu_virt_addr=0x0, size=0x2010000
[ 12.779111] arise info: bl_buffer aligned: gpu_virt_addr=0x0, size=0x2000000
[ 12.859856] arise info: flush_fifo_buffer: gpu_virt_addr=ffc00000, kmd_virt_addr=(____ptrval____)
[ 12.859861] arise info: reg_Bl_Size.uint 0x1000002 readvalue: 0x1000002, Invalid BL enable:1
[ 12.973141] arise info: adapter->ctl_flags.worker_thread_enable 1
[ 12.973149] arise info: sys caps: os page size :0x1000, os page shift:0xc, iommu_support:1, pcie:3.0x8
[ 12.973153] arise info: hw cfg: chip slice mask :f, miu channel index:2, miu channel size index:0, backdoor:0
[ 12.973157] arise info: hw caps: secure:0, snoop:1, 4K_page:1, 64K_page:0, Paging:1, CG:1, DFS:0
[ 12.973159] arise info: power caps: ClockGating:1, PowerGating:0 PowerSwitch:0
[ 12.973162] arise info: Ctrl: Recovery:1, WK-thread:1, Hang-Dump:0, RunOnQT:0, PwmMode:0x101, NonsnoopEnable:1
[ 12.973268] arise info: arise = (____ptrval____), arise->pdev = (____ptrval____), dev = (____ptrval____), dev->primary = (____ptrval____)
[ 12.988820] arise info: CPU platform pcie speed level: 179
[ 12.988851] arise info: self test done
[ 12.989126] arise 0000:01:00.0: [drm] Registered 15 planes with drm panic
[ 12.989131] [drm] Initialized arise 37.0.85 for 0000:01:00.0 on minor 0
[ 13.041757] arise 0000:01:00.0: [drm] fb0: arisedrmfb frame buffer device
[ 14.080186] arise info: Task [plymouthd] set mode to crtc 0.
[ 14.080194] arise info: KMS set mode to path(iga_index-->active_device): 0-->0x8000.
[ 14.080655] arise info: CRTC atomic enable: to turn on vblank and screen of crtc: 0
[ 14.080668] arise info: Task [plymouthd] turn on power of device: 0x8000.
[ 14.092465] arise info: capture 4, event: 4
[ 14.092469] arise info: capture WB1, event: 4
[ 30.370475] arise info: Task [Xorg] turn off power of device: 0x8000.
[ 30.370487] arise info: capture 4, event: 3
[ 30.370492] arise info: capture WB1, event: 3
[ 30.380500] arise info: CRTC atomic disable: to turn off vblank and screen of crtc: 0
[ 30.397217] arise info: Task [Xorg] set mode to crtc 0.
[ 30.397225] arise info: KMS set mode to path(iga_index-->active_device): 0-->0x8000.
[ 30.397694] arise info: CRTC atomic enable: to turn on vblank and screen of crtc: 0
[ 30.397706] arise info: Task [Xorg] turn on power of device: 0x8000.
[ 30.410467] arise info: capture 4, event: 4
[ 30.410472] arise info: capture WB1, event: 4