

Hello,
Try these steps:
Check NVIDIA driver: Run nvidia-smi to confirm the driver is installed.
Use NVIDIA settings: Run sudo nvidia-settings to configure the display correctly.
Disable Wayland: Edit /etc/gdm3/custom.conf and set WaylandEnable=false. e-zpassma
Manually configure with xrandr: Use xrandr --output HDMI-1 --mode 1920x1080 --rate 60.
Check DPI and scaling: Set DPI to 96 with xrandr --dpi 96.

Check with xrandr to confirm HDMI output name and resolution, then try setting it manually:
xrandr --output HDMI-1 --mode 1920x1080 --scale 1x1
Also, use nvidia-settings to adjust scaling. Make sure you’re running on Xorg, not Wayland, for better NVIDIA support. If problem persists, try different NVIDIA driver versions or check PRIME setup. prepaid gift balance com
Good afternoon
I have installed deepin 23 and 25 on my laptop, but after updating all the drivers, installing the NVidia driver etc, it no longer works with the second monitor via HDMI.
It is recognized and everything, but it does not work, sometimes it appears on the second screen "out of scale" but it is set to 1080p
Using an AMD/NVidia notebook