[Desktop] Deepin 系统出现大问题(请看帖子描述),希望官方尽快处理 Resolved
Tofloor
poster avatar
寂静的羽夏
deepin
2022-05-27 17:55
Author

Deepin 系统出现大问题(请看帖子描述),希望官方尽快处理

昨天正常使用关机,结果今天早上起来开机出现了问题,表现如下:

  1. 任务栏疯狂重启,尝试三次进入安全模式
  2. 无法正常联网
  3. 启动器的关闭按钮无效,也无法锁屏

今天相关错误日志:

[    6.905496] iwlwifi 0000:03:00.0: iwlmvm doesn't allow to disable BT Coex, check bt_coex_active module parameter
[    6.905596] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    6.905868] thermal thermal_zone1: failed to read out thermal zone (-61)
[    6.910555] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    7.009207] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  510.73.05  Sat May  7 05:30:26 UTC 2022
[    7.015248] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  510.73.05  Sat May  7 05:21:20 UTC 2022
[    7.033311] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    7.036184] intel_rapl_common: Found RAPL domain package
[    7.036186] intel_rapl_common: Found RAPL domain core
[    7.036186] intel_rapl_common: Found RAPL domain uncore
[    7.036187] intel_rapl_common: Found RAPL domain dram
[    7.050689] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200925/nsarguments-68)
[    7.062920] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[    7.641576] new mount options do not match the existing superblock, will be ignored
[    7.716970] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[    7.748422] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.748424] Bluetooth: BNEP filters: protocol multicast
[    7.748426] Bluetooth: BNEP socket layer initialized
[    7.802977] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    7.941819] vboxdrv: Found 6 processor cores
[    7.959684] vboxdrv: TSC mode is Invariant, tentative frequency 2903986277 Hz
[    7.959685] vboxdrv: Successfully loaded version 6.1.34 r150636 (interface 0x00320000)
[    7.987491] Generic FE-GE Realtek PHY r8169-0-201:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-0-201:00, irq=IGNORE)
[    8.052139] vfs_monitor: vfs_monitor init ok
[    8.058353] vfs_monitor: mp: /, major: 8, minor: 8
[    8.058355] vfs_monitor: mp: /boot/efi, major: 8, minor: 1
[    8.058355] vfs_monitor: mp: /home, major: 8, minor: 19
[    8.058356] vfs_monitor: mp: /var/lib/lxcfs, major: 0, minor: 55
[    8.116226] vfs_monitor: register_kretprobes 10 ok
[    8.169984] VBoxNetFlt: Successfully started.
[    8.173271] VBoxNetAdp: Successfully started.
[    8.199516] r8169 0000:02:00.1 enp2s0f1: Link is Down
[    8.300861] broken atomic modeset userspace detected, disabling atomic
[    8.654176] vfs_monitor: on_do_mount_ent type is empty or too long
[    8.654296] vfs_monitor: on_do_mount_ent type is empty or too long
[   11.416471] wlp3s0: authenticate with 4c:e9:e4:d6:98:22
[   11.418780] wlp3s0: send auth to 4c:e9:e4:d6:98:22 (try 1/3)
[   11.420939] wlp3s0: authenticated
[   11.423426] wlp3s0: associate with 4c:e9:e4:d6:98:22 (try 1/3)
[   11.428929] wlp3s0: RX AssocResp from 4c:e9:e4:d6:98:22 (capab=0x8001 status=0 aid=2)
[   11.430397] wlp3s0: associated
[   11.431119] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   23.316042] Bluetooth: RFCOMM TTY layer initialized
[   23.316048] Bluetooth: RFCOMM socket layer initialized
[   23.316052] Bluetooth: RFCOMM ver 1.11
[   26.268942] vfs_monitor: This is the fuse filesytem,so return
[   26.584265] vfs_monitor: This is the fuse filesytem,so return
[   38.735056] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[   40.598607] uengine0: port 1(veth5NXURL) entered blocking state
[   40.598610] uengine0: port 1(veth5NXURL) entered disabled state
[   40.598682] device veth5NXURL entered promiscuous mode
[   40.638365] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[   40.666408] eth0: renamed from veth9AL24R
[   40.689890] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   40.689961] IPv6: ADDRCONF(NETDEV_CHANGE): veth5NXURL: link becomes ready
[   40.690021] uengine0: port 1(veth5NXURL) entered blocking state
[   40.690025] uengine0: port 1(veth5NXURL) entered forwarding state
[   40.690116] IPv6: ADDRCONF(NETDEV_CHANGE): uengine0: link becomes ready
[   40.841590] new mount options do not match the existing superblock, will be ignored
[   43.488554] capability: warning: `main' uses 32-bit capabilities (legacy support in use)
[   45.166674] bpfilter: Loaded bpfilter_umh pid 3657
[   45.166895] Started bpfilter
[   69.138281] dde-lock[4440]: segfault at 4 ip 00007fb56d205057 sp 00007ffdedc71380 error 4 in libQt5Core.so.5.15.1[7fb56d147000+2ed000]
[   69.138288] Code: 00 00 00 41 57 41 56 41 55 49 89 f5 41 54 55 48 89 fd 53 48 83 ec 38 48 8b 1e 64 48 8b 04 25 28 00 00 00 48 89 44 24 28 31 c0 <8b> 73 04 85 f6 75 3a 48 89 1f 8b 03 83 c0 01 83 f8 01 0f 87 b9 01
[   69.419742] dde-lock[4528]: segfault at 4 ip 00007f9092899057 sp 00007fff0bf0e450 error 4 in libQt5Core.so.5.15.1[7f90927db000+2ed000]
[   69.419749] Code: 00 00 00 41 57 41 56 41 55 49 89 f5 41 54 55 48 89 fd 53 48 83 ec 38 48 8b 1e 64 48 8b 04 25 28 00 00 00 48 89 44 24 28 31 c0 <8b> 73 04 85 f6 75 3a 48 89 1f 8b 03 83 c0 01 83 f8 01 0f 87 b9 01

如果官方想要排除需要什么信息,我会尽快提供,上面的问题导致我强制回到我的 Win 备用系统进行,但我的最重要的工作环境在 Deepin ,希望能尽快解决。

Reply Favorite View the author
Comments
poster avatar
正直笔尖
2022-05-27 19:20
可能是手欠造成的,手不欠不会出问题
All Replies
寂静的羽夏
deepin
2022-05-27 17:59
#1

还有设置无法打开

Reply View the author
pipigo
deepin
2022-05-27 18:00
#2

今天早上开机也遇到问题,重启后正常。。。

Reply View the author
寂静的羽夏
deepin
2022-05-27 18:01
#3
pipigo

今天早上开机也遇到问题,重启后正常。。。

我重启4遍没用才过来问的sad

Reply View the author
萨摩耶甜甜
deepin
2022-05-27 19:42
#4

应该是更改了什么库 导致了这个库libQt5Core.so.5.15.1出现问题 回想一下昨天操作了什么

Reply View the author
寂静的羽夏
deepin
2022-05-27 19:47
#5
萨摩耶甜甜

应该是更改了什么库 导致了这个库libQt5Core.so.5.15.1出现问题 回想一下昨天操作了什么

就是玩玩游戏,剪辑了视频,并没有安装任何软件和包管理操作

Reply View the author
寂静的羽夏
deepin
2022-05-27 19:48
#6

因为急用,最终没办法,自己回滚系统了,问题解决了

Reply View the author
bigben446
deepin
2022-05-27 20:10
#7
寂静的羽夏

因为急用,最终没办法,自己回滚系统了,问题解决了

deepin如何回滚系统的?

Reply View the author
Comments
正直笔尖
2022-05-27 20:22
不需要第三方软件,系统自带备份,回滚,特别快
寂静的羽夏
deepin
2022-05-27 20:13
#8
bigben446

deepin如何回滚系统的?

我用了第三方的软件 Timeshift ,做好备份,一般就没问题了。

Reply View the author
Comments
正直笔尖
2022-05-27 20:21
不需要第三方软件,系统自带备份,回滚,特别快
神末shenmo
deepin
Spark-App
Q&A Team
2022-05-27 22:08
#9

@正直笔尖

自带的备份还原不能手动触发,而且非全盘安装适用性也不如timeshift

deepin-clone的速度快吗?没感觉到

Reply View the author
Comments
正直笔尖
2022-05-27 22:39
本人全盘安装中并没有选择备份打√,修改内测源后(同时备份原来的源),进系统设置里面升级,自动强制备份、下载、安装、重启。若发现测试版有问题,或者不满意,开机重启时迅速选择菜单回退到某月某日的正式版,系统、软件、数据,一切回归保持原样,速度还挺快的!回滚后别忘了修改原来正式版源。
bigben446
deepin
2022-06-09 08:30
#10
神末shenmo

@正直笔尖

自带的备份还原不能手动触发,而且非全盘安装适用性也不如timeshift

deepin-clone的速度快吗?没感觉到

非全盘安装timeshift好用吗?可以回滚系统还是包括各种软件配置?

Reply View the author