苦于安装各类打印机,总是无法打印。
Tofloor
poster avatar
jms999
deepin
2016-08-18 20:54
Author
新安装的系统,准备安装打印机,经过实测,本地查找驱动都正常,安装也没提示错误,但就是打印不出来,无任何动作,报错。
1:提示打印错误。点诊断。
2:Printing troubleshooter->点前进 。
3:Server Not Exporting Printers
Although one or more printers are marked as being shared,this print server is not exporting shared printers to the newwork.


Enable the 'Publish shared printers connected to this system' option in the server settings using the printing administration tool.To start this tool, select System->Administration->rint Settings from the man menu.->点前进,选择P1108打印机。
4:Status Messages
There are status messages associated with this queue.
The printer's state message is:'ready to print'.
5:Debugging
This step will enable debugging output from the CUPS scheduler.This may cause the scheduler to restart.Click the button below to enable debugging.
6:Sorry!
There is no obvious solution to this problem.Your answers have been collected together with other useful information.If you would like to report a bug,please include this information.


只有M1005打印机打印,扫描都可以使用。其他型号的都不行,链接Windows共享的打印也打印不出来。


本地打印机HPM1005,HP1108,HP CM1213


共享打印机HP1022


请朋友们帮忙解决。
Reply Favorite View the author
All Replies
avatar
iceyer
deepin
2016-08-18 21:20
#1
安装一下hplip试试。
还有选择打印机驱动的时候要选择正确的型号。
Reply View the author
avatar
liulangdedao
deepin
2016-08-18 22:24
#2
本帖最后由 liulangdedao 于 2016-8-18 14:27 编辑

最近使用深度的云打印,感觉还可以的,只不过我是用了一台win的平板,链接到打印机上的。这样基本上都能打印了。比普通的电脑好的地方在于,这玩意很省电,就算待机一个月,也没用我诊所的电脑俩小时费电。至于这商品我就不打马赛克了,这玩意刚买的时候,是想给老婆看电视用的,可是后来这东西卡的一比,所以就扔到一边不用了,深度的云打印出来之后,我就把这玩意链接上打印机了,算是废物再利用了。我的打印机用的还是串口,网上又买了一根usb变串口的线才能用。
Reply View the author
avatar
152******14
deepin
2016-08-19 01:01
#3
打印机型号+linux 百度搜。
Reply View the author
avatar
自由鸟
deepin
2016-08-19 05:24
#4
本帖最后由 richardday 于 2016-8-19 20:35 编辑

试试mint,可以找一下薄荷网站长,他应该挺厉害的
Reply View the author
avatar
jms999
deepin
2016-08-19 17:44
#5
亲们,还是不行,mint和hplip命令查找不到。请大家帮忙帮忙。
Reply View the author
avatar
txdtj
deepin
2016-08-19 21:30
#6
我的深度,爱普生ME1+,HP 1020,1022,1005,K209A-G都自动识别过,都能用。但有个前提就是第一次识别没问题,再加入其他就不好用了
Reply View the author
avatar
tracy1989wan
deepin
2016-08-19 22:34
#7
我的HP打印机安装hplip后能正常使用!
Reply View the author
avatar
iceyer
deepin
2016-08-19 23:37
#8
https://bbs.deepin.org/post/42487
亲们,还是不行,mint和hplip命令查找不到。请大家帮忙帮忙。

hplip自带一个图形界面的配置程序,那个能找到吗?
Reply View the author
avatar
米斯特凯特米奥
deepin
2016-08-20 02:03
#9
https://bbs.deepin.org/post/38767#2
Reply View the author
avatar
米斯特凯特米奥
deepin
2016-08-20 02:04
#10
我也是惠普打印机在我这个贴子里我记录了安装惠普打印机全过程希望对你有帮助
Reply View the author
avatar
苏平君
deepin
2016-08-20 02:27
#11
插上打印机自动识别出来打印机并安装了驱动,装是装完了,就是打不出来,一打印就错误,停止
Reply View the author
avatar
jms999
deepin
2016-08-20 17:55
#12
亲们,我的问题已经解决了。多亏了论坛回复的Jzqys。他的办法在回复中,请大家使用。

深度默认安装了。hplip这个服务,所以我安装不上也搜索不到。hplip3.16.5版本。


添加打印型号和驱动都很正常,就是无法打印。
我安装了新立得软件包管理器。sudo apt-get install synaptic后,
搜索hplip也是除了dbg无法安装,其他的都选择上进行了安装,然后重启系统,右下角出现了hp的标志,可以显示所有打印机,但是都显示未链接。
之后提示安装插件,我也安装了,root密码要自己先改下sudo passwd root。之后打开hp图片中的device manger 后,过几秒钟就识别到我一直未拔usb线和打开电源的打印机,并正常打印。


在此感谢亲们的帮忙。谢谢。

Reply View the author