无线网卡老掉线,怎么解决!
Tofloor
poster avatar
ykxo
deepin
2016-07-24 21:29
Author
磊科nw336E   自带驱动正常使用,但过不了多久就会无法连解,wifi显还在连接中,但其实以断,手动断开无法再成功连接,USB无线网卡要拔掉重插才能重连接上网.
Reply Favorite View the author
All Replies
avatar
jingle
deepin
2016-07-25 03:41
#1
谢谢反馈,我们一直在收集网卡的问题。
Reply View the author
avatar
rekols
deepin
2016-07-25 04:01
#2
https://bbs.deepin.org/post/41688
谢谢反馈,我们也在网卡的问题。

我们也在网卡的问题什么意思
Reply View the author
avatar
liujianfeng
deepin
2016-07-25 18:05
#3
sudo deepin-feedback-cli
上传生成的压缩包
Reply View the author
avatar
自由鸟
deepin
2016-07-25 22:41
#4
1、换成有线;2、换新无线网卡(最好是i或a芯);3、检查无线路由器(若信号不稳,则换之)
Reply View the author
avatar
jason_deepin
deepin
2016-10-18 06:15
#5
本帖最后由 jason_deepin 于 2016-10-17 22:24 编辑

lspci -vnn 可以查看驱动、内核信息。
我的驱动是iwlwifi,如果和我的不一样,那么以下3个步骤,你要将iwlwifi替换成你查到的驱动。
1、在终端运行:sudo gedit /etc/modprobe.d/iwlwifi.conf
2、在打开的这个配置文件中空白处添加:options iwlwifi 11n_disable=1
3、保存文件并重启。
--------------------------------------------------------------------------------------------------------------------------------------------------
英文原文:
Ok.

In terminal run:

sudo gedit /etc/modprobe.d/iwlwifi.conf

This will give you the wireless conf file.

At the bottom of the file, press enter to give yourself a blankline, then enter:

options iwlwifi 11n_disable=1

Save the file and reboot, then test speeds.
--------------------------------------------------------------------------------------------------------------------------------------------------
关于 “无线网卡11n”,如下说明:
802.11是无线网络连接的标准,就是我们通常所说的WIFI。
使用比较简单,只要将网卡插到电脑上,安装相应版本的驱动程序,即可搜索无线网络,连接使用。

802.11b是指11M的速率标准,802.11g是指54M的速率标准,802.11n是指150M的速率标准。

802.11n传输速度估计将达540Mbit/s(需要在物理层产生更高速度的传输率),此项新标准应该要比 802.11b快上50倍,而比802.11g快上10倍左右。

802.11n也将会比目前的无线网络传送到更远的距离,从型号区别b/g的只能支持54M的带宽,BGN可以支持150M或者300M的带宽,都是向下兼容的!

802.11n 是比较新的网卡,最高速率好像是支持128M/秒,不过现在普通的无线路由器最大只到54M/秒,实际上是用不上的。

所以猜测是我们的路由器不支持11n的标准,而系统老是用11n的标准去找它连接,不成功再去试用别的标准,在这上面浪费了时间。options iwlwifi 11n_disable=1这样将11n禁用就不用试用了,一次就和路由器通上信了。


Reply View the author