WifiAssist安装wifi启动报错
Tofloor
poster avatar
situhouyi
deepin
2016-07-03 00:53
Author
deepin下按照这前几天论坛发的一个贴,安装了  https://github.com/lzjqsdd/WifiAssist  这个wifi
结果启动报  :'wlan0' is not a WiFi interface

请教大神,有没有安装成功的?
Reply Favorite View the author
All Replies
avatar
comzhong
deepin
2016-07-03 06:39
#1
本帖最后由 comzhong 于 2016-7-3 00:50 编辑

执行下ifconfig看下网卡名ts@ts-pc:~$ ifconfig
enp5s0f5: flags=4099  mtu 1500
        ether 20:cf:30:63:4f:57  txqueuelen 4096  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 30

wlp4s0: flags=4163  mtu 1500
        inet 192.168.1.110  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::76f0:6dff:fe7a:31fd  prefixlen 64  scopeid 0x20
        ether 74:f0:6d:7a:31:fd  txqueuelen 4096  (Ethernet)
        RX packets 5344  bytes 5724560 (5.4 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 4779  bytes 760928 (743.0 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


手动编辑/root/.WifiAssist/config.ini文件,
第一个是创建wifi的网卡,一般在ifconfig的最后一个,第二个是共享的网卡。
INTERFACE_CREATED=wlp4s0
INTERFACE_SHARED=enps0f5
Reply View the author
avatar
lzjqsdd
deepin
2016-07-03 17:35
#2
你好,下一个版本会增加网卡自动检测,现在带来的不便还请谅解。
Reply View the author