deepin2015.2 美中不足 g为
Tofloor
poster avatar
fhqiw
deepin
2016-06-02 17:02
Author
今天升级到了2015.2  第一感觉,比原来的所有版都流畅。但美中不足的是,插上耳机或者音箱没有声音。

Reply Favorite View the author
All Replies
avatar
liujindong
deepin
2016-06-02 17:09
#1
重启过也没声音吗,这个样子看上去像声卡的驱动没装好还是什么原因,应该不是系统问题,我这边还在看视频呢,最好挂一下你的声卡和主板的型号,让官方人员看一下,或者直接在系统的反馈里反馈一下。
Reply View the author
avatar
lieri
deepin
2016-06-02 17:14
#2
试着到控制中心的声音选项中调整一下声音的输出设备和端口试试
Reply View the author
avatar
fhqiw
deepin
2016-06-02 17:21
#3
都试过了不行啊。把耳机拔掉扬声器是有声音的。
Reply View the author
avatar
fhqiw
deepin
2016-06-02 17:25
#4
CPU  (英特尔)Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz(1800 Mhz)
主板  华硕 X450CC
内存  4.00 GB (   1600 MHz)
主硬盘  500 GB (希捷 ST500LT0 ST500LT012-9WS14 SCSI Disk Device 已使用时间: 951小时)
显卡  NVIDIA GeForce GT 720M  
显示器  三星 SAMSUNG 32位真彩色 60Hz
声卡  Realtek High Definition Audio
网卡  Qualcomm Atheros AR9485 Wireless Network Adapter
Reply View the author
avatar
kingskill
deepin
2016-06-02 17:35
#5
注意看三楼第二张图,在“模拟耳机”上面打钩变蓝。

然后,把后面板的扬声器拔掉,再插入前面板的耳机。

然后前面板的耳机应该就有声音了。

貌似前后面板只能取其一。鱼和熊掌。
Reply View the author
avatar
fhqiw
deepin
2016-06-02 17:43
#6
还是不行啊。
Reply View the author
avatar
186******53
deepin
2016-06-02 18:08
#7
应该是驱动的问题,你的笔记本支持SonicMaster Lite 音效技术,该去主板固件设置程序看看那,是不是可以做些调整。
Reply View the author
avatar
fhqiw
deepin
2016-06-02 19:00
#8
具体怎么做?请大师指点
Reply View the author
avatar
kingskill
deepin
2016-06-02 19:20
#9
个人建议做完6楼设置后,关机,再启动一下看看。不行的话,估计就是8楼的问题了。
Reply View the author
avatar
fhqiw
deepin
2016-06-02 19:25
#10
设置完重启了几次都不能解决问题。2015.1.1明有这种情况后来是自己变好的。现在升级到2015.2又出现了这种情况,现在重启也没有用了。
Reply View the author
avatar
lovepurewhite
deepin
2016-06-02 21:02
#11
还是不支持dpi 调节
Reply View the author
avatar
yanbowen
deepin
Community Developer
2016-06-02 22:08
#12
麻烦贴一下 pacmd  list-cards 和 pacmd  list-sinks 的输出,谢谢!
Reply View the author
avatar
fhqiw
deepin
2016-06-03 00:50
#13
pacmd  list-cards
1 card(s) available.
    index: 0
        name:
        driver:
        owner module: 6
        properties:
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xf7a10000 irq 34"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1b.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "1e20"
                device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "0"
                device.description = "内部音频"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        profiles:
                input:analog-stereo: 模拟立体声 输入 (priority 60, available: unknown)
                output:analog-stereo: 模拟立体声 输出 (priority 6000, available: unknown)
                output:analog-stereo+input:analog-stereo: 模拟立体声双工 (priority 6060, available: unknown)
                output:hdmi-stereo: Digital Stereo (HDMI) 输出 (priority 5400, available: unknown)
                output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) 输出 + 模拟立体声 输入 (priority 5460, available: unknown)
                output:hdmi-surround: Digital Surround 5.1 (HDMI) 输出 (priority 300, available: unknown)
                output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) 输出 + 模拟立体声 输入 (priority 360, available: unknown)
                output:hdmi-surround71: Digital Surround 7.1 (HDMI) 输出 (priority 300, available: unknown)
                output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) 输出 + 模拟立体声 输入 (priority 360, available: unknown)
                off: 关 (priority 0, available: unknown)
        active profile:
        sinks:
                alsa_output.pci-0000_00_1b.0.analog-stereo/#0: 内部音频 模拟立体声
        sources:
                alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor of 内部音频 模拟立体声
                alsa_input.pci-0000_00_1b.0.analog-stereo/#1: 内部音频 模拟立体声
        ports:
                analog-input-mic: 麦克风 (priority 8700, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-input-microphone"
                analog-output-speaker: 扬声器 (priority 10000, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "audio-speakers"
                analog-output-headphones: 模拟耳机 (priority 9000, latency offset 0 usec, available: yes)
                        properties:
                                device.icon_name = "audio-headphones"
                hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "video-display"
Reply View the author
avatar
fhqiw
deepin
2016-06-03 00:51
#14
pacmd  list-sinks
1 sink(s) available.
  * index: 0
        name:
        driver:
        flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: RUNNING
        suspend cause:
        priority: 9959
        volume: front-left: 24899 /  38% / -25.22 dB,   front-right: 29642 /  45% / -20.67 dB
                balance 0.16
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 79.69 ms
        max request: 15 KiB
        max rewind: 64 KiB
        monitor source: 0
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     立体声
        used by: 1
        linked by: 1
        configured latency: 90.00 ms; range is 0.50 .. 371.52 ms
        card: 0
        module: 6
        properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC270 Analog"
                alsa.id = "ALC270 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xf7a10000 irq 34"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1b.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "1e20"
                device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "front:0"
                device.buffering.buffer_size = "65536"
                device.buffering.fragment_size = "32768"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "模拟立体声"
                device.description = "内部音频 模拟立体声"
                alsa.mixer_name = "Realtek ALC270"
                alsa.components = "HDA:10ec0270,1043126d,00100100 HDA:80862806,80860101,00100000"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        ports:
                analog-output-speaker: 扬声器 (priority 10000, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "audio-speakers"
                analog-output-headphones: 模拟耳机 (priority 9000, latency offset 0 usec, available: yes)
                        properties:
                                device.icon_name = "audio-headphones"
        active port:

Reply View the author
avatar
jinable
deepin
2016-06-03 18:02
#15
哈哈,跟我问题一样,我解决 了。就是换声卡啊。
Reply View the author
avatar
fhqiw
deepin
2016-06-03 18:20
#16
换声卡太折腾了,好好的笔记本把声卡换了,不是个好建议。
Reply View the author
avatar
159******10
deepin
2016-06-03 18:20
#17
https://bbs.deepin.org/post/40034
都试过了不行啊。把耳机拔掉扬声器是有声音的。

会不会是耳机坏了
Reply View the author
avatar
fhqiw
deepin
2016-06-03 23:25
#18
耳机没有问题。
Reply View the author