acer v5-591g-55uy wifi无法启动
Tofloor
poster avatar
ghbhaha
deepin
2016-01-28 00:42
Author
[    9.222482] ath10k_pci 0000:07:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0
[    9.494468] ath10k_pci 0000:07:00.0: firmware: failed to load ath10k/cal-pci-0000:07:00.0.bin (-2)
[    9.494468] ath10k_pci 0000:07:00.0: firmware: failed to load ath10k/cal-pci-0000:07:00.0.bin (-2)
[    9.494502] ath10k_pci 0000:07:00.0: Direct firmware load for ath10k/cal-pci-0000:07:00.0.bin failed with error -2
[    9.494502] ath10k_pci 0000:07:00.0: Direct firmware load for ath10k/cal-pci-0000:07:00.0.bin failed with error -2
[    9.495893] ath10k_pci 0000:07:00.0: firmware: failed to load ath10k/QCA6174/hw3.0/board-pci-168c:003e:11ad:0807.bin (-2)
[    9.495893] ath10k_pci 0000:07:00.0: firmware: failed to load ath10k/QCA6174/hw3.0/board-pci-168c:003e:11ad:0807.bin (-2)
[    9.495929] ath10k_pci 0000:07:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/board-pci-168c:003e:11ad:0807.bin failed with error -2
[    9.495929] ath10k_pci 0000:07:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/board-pci-168c:003e:11ad:0807.bin failed with error -2
[    9.495931] ath10k_pci 0000:07:00.0: failed to load spec board file, falling back to generic: -2
[    9.505808] ath10k_pci 0000:07:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/board.bin
[    9.505808] ath10k_pci 0000:07:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/board.bin
[    9.505817] ath10k_pci 0000:07:00.0: firmware: failed to load ath10k/QCA6174/hw3.0/firmware-5.bin (-2)
[    9.505817] ath10k_pci 0000:07:00.0: firmware: failed to load ath10k/QCA6174/hw3.0/firmware-5.bin (-2)
[    9.505849] ath10k_pci 0000:07:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
[    9.505849] ath10k_pci 0000:07:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
[    9.505851] ath10k_pci 0000:07:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
[    9.505851] ath10k_pci 0000:07:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
[    9.526458] ath10k_pci 0000:07:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/firmware-4.bin
[    9.526458] ath10k_pci 0000:07:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/firmware-4.bin
[   11.656850] ath10k_pci 0000:07:00.0: qca6174 hw3.2 (0x05030000, 0x00340aff, 168c:003e:11ad:0807 fallback) fw WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 htt 3.26 wmi 4 cal otp max_sta 32
[   11.656853] ath10k_pci 0000:07:00.0: debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[   12.656117] ath10k_pci 0000:07:00.0: suspend timed out - target pause event never came
[   13.228906] ath10k_pci 0000:07:00.0 wlp7s0: renamed from wlan0
[   24.214510] ath10k_pci 0000:07:00.0: failed to enable adaptive qcs: -11
[   27.218283] ath10k_pci 0000:07:00.0: could not suspend target (-11)
[   32.929411] ath10k_pci 0000:07:00.0: failed to enable adaptive qcs: -11
[   35.933163] ath10k_pci 0000:07:00.0: could not suspend target (-11)
[   41.227756] ath10k_pci 0000:07:00.0: failed to enable adaptive qcs: -11
[   44.231519] ath10k_pci 0000:07:00.0: could not suspend target (-11)
[   60.394907] ath10k_pci 0000:07:00.0: failed to enable ani by default: -11
[   63.467368] ath10k_pci 0000:07:00.0: could not suspend target (-11)
[   68.876263] ath10k_pci 0000:07:00.0: failed to enable ani by default: -11
[   71.902225] ath10k_pci 0000:07:00.0: could not suspend target (-11)
[   87.713324] ath10k_pci 0000:07:00.0: failed to enable ani by default: -11
[   90.716647] ath10k_pci 0000:07:00.0: could not suspend target (-11)
[   96.104672] ath10k_pci 0000:07:00.0: failed to enable adaptive qcs: -11
[   99.107265] ath10k_pci 0000:07:00.0: could not suspend target (-11)
[  114.710750] ath10k_pci 0000:07:00.0: failed to enable ani by default: -11
[  117.714017] ath10k_pci 0000:07:00.0: could not suspend target (-11)
[  123.015787] ath10k_pci 0000:07:00.0: failed to enable ani by default: -11
[  126.019132] ath10k_pci 0000:07:00.0: could not suspend target (-11)
[  141.749221] ath10k_pci 0000:07:00.0: htt version request timed out
[  141.749230] ath10k_pci 0000:07:00.0: failed to setup htt: -110
[  141.819421] ath10k_pci 0000:07:00.0: Could not init core: -110
[  147.083310] ath10k_pci 0000:07:00.0: failed to enable adaptive qcs: -11
[  150.086898] ath10k_pci 0000:07:00.0: could not suspend target (-11)
[  165.789201] ath10k_pci 0000:07:00.0: failed to enable adaptive qcs: -11
[  168.792762] ath10k_pci 0000:07:00.0: could not suspend target (-11)
[  174.103066] ath10k_pci 0000:07:00.0: failed to enable ani by default: -11
[  177.106648] ath10k_pci 0000:07:00.0: could not suspend target (-11)

Reply Favorite View the author
All Replies
avatar
cxbii
deepin
2016-02-02 22:42
#1
请使用启动器的“深度用户反馈”上报这个问题,我们需要你的系统信息。

我们的反馈工具会收集我们需要的信息
Reply View the author