With the power profile selection in the control center, currently only 2 options "powersave" and "balanced".
When I selected "powersave" the CPU usage was very high, very slow with low frequency and low cpu temperature and little fan use and when I switched to "balanced" it increased the frequency a lot and very high the temperature and a lot of fan use with minimal processes.

I found a solution on the web, which works fine for me, and I share it and it would be good that in the next updates, in the energy profile, more profiles can be selected, such as

Power save
Conservative
Balanced
Performance

My solution ,Use with care, at your risk

All in terminal

for supported profile

$ grep . /sys/devices/system/cpu/cpufreq/policy*/energy_performance*

and then make according to the desired energy profile

"POWERSAVE"

$ echo powersave | sudo tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor

$ echo power | sudo tee /sys/devices/system/cpu/cpufreq/policy*/energy_performance_preference

$ grep . /sys/devices/system/cpu/cpufreq/policy*/energy_performance_preference

"CONSERVATIVE"
$ echo powersave | sudo tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
$ echo balance_power | sudo tee /sys/devices/system/cpu/cpufreq/policy*/energy_performance_preference

$ grep . /sys/devices/system/cpu/cpufreq/policy*/energy_performance_preference

"ONDEMAND"
$ echo powersave | sudo tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
$ echo balance_performance | sudo tee /sys/devices/system/cpu/cpufreq/policy*/energy_performance_preference

$ grep . /sys/devices/system/cpu/cpufreq/policy*/energy_performance_preference

"PERFORMANCE"
$ echo powersave | sudo tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
$ echo performance | sudo tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
$ echo performance | sudo tee /sys/devices/system/cpu/cpufreq/policy*/energy_performance_preference

$ grep . /sys/devices/system/cpu/cpufreq/policy*/energy_performance_preference

and finally an executable file at startup

#!/bin/sh
echo powersave | sudo tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
echo balance_performance | sudo tee /sys/devices/system/cpu/cpufreq/policy*/energy_performance_preference