是用应用商店安装吗？具体操作和问题是什么？应用商店有没有报错？如果有麻烦截图好吗？

应用商店安装不了，终端也安装不了，截图工具打不开，没办法发图，去查了下，像是Wifi抓包什么的，我也不懂，我还是下载火狐才能登录帐号发的，系统自带的都登不了，


lmm@lmm-PC:~$ sudo apt-get install fcitx
正在读取软件包列表... 完成
正在分析软件包的依赖关系树      
正在读取状态信息... 完成      
建议安装：
  fcitx-m17n fcitx-tools
推荐安装：
  fcitx-frontend-all | fcitx-frontend-fbterm
下列软件包将被【卸载】：
  wireshark-common
下列软件包将被升级：
  fcitx
升级了 1 个软件包，新安装了 0 个软件包，要卸载 1 个软件包，有 316 个软件包未被升级。
有 4 个软件包没有被完全安装或卸载。
需要下载 0 B/18.8 kB 的归档。
解压缩后将会空出 1,071 kB 的空间。
您希望继续执行吗？ [Y/n] y
debconf: Perl may be unconfigured (Can't load '/usr/lib/x86_64-linux-gnu/perl/5.28/auto/re/re.so' for module re: /usr/lib/x86_64-linux-gnu/perl/5.28/auto/re/re.so: 文件过短 at /usr/share/perl/5.28/XSLoader.pm line 93.
at /usr/lib/x86_64-linux-gnu/perl/5.28/re.pm line 89.
Compilation failed in require at /usr/share/perl/5.28/Text/Wrap.pm line 58.
BEGIN failed--compilation aborted at /usr/share/perl/5.28/Text/Wrap.pm line 58.
Compilation failed in require at /usr/share/perl5/Debconf/Template.pm line 10.
BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Template.pm line 10.
Compilation failed in require at /usr/share/perl5/Debconf/Question.pm line 8.
BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Question.pm line 8.
Compilation failed in require at /usr/share/perl5/Debconf/Config.pm line 7.
BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Config.pm line 7.
Compilation failed in require at /usr/share/perl5/Debconf/Log.pm line 10.
Compilation failed in require at (eval 1) line 4.
BEGIN failed--compilation aborted at (eval 1) line 4.
) -- aborting
(正在读取数据库 ... 系统当前共安装有 184692 个文件和目录。)
正在卸载 wireshark-common (2.6.8-1.1) ...
Can't load '/usr/lib/x86_64-linux-gnu/perl/5.28/auto/re/re.so' for module re: /usr/lib/x86_64-linux-gnu/perl/5.28/auto/re/re.so: 文件过短 at /usr/share/perl/5.28/XSLoader.pm line 93.
at /usr/lib/x86_64-linux-gnu/perl/5.28/re.pm line 89.
Compilation failed in require at /usr/share/perl/5.28/Text/Wrap.pm line 58.
BEGIN failed--compilation aborted at /usr/share/perl/5.28/Text/Wrap.pm line 58.
Compilation failed in require at /usr/share/perl5/Debconf/Template.pm line 10.
BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Template.pm line 10.
Compilation failed in require at /usr/share/perl5/Debconf/Question.pm line 8.
BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Question.pm line 8.
Compilation failed in require at /usr/share/perl5/Debconf/Config.pm line 7.
BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Config.pm line 7.
Compilation failed in require at /usr/share/perl5/Debconf/Log.pm line 10.
Compilation failed in require at /usr/share/perl5/Debconf/Db.pm line 7.
BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Db.pm line 7.
Compilation failed in require at /usr/share/debconf/frontend line 6.
BEGIN failed--compilation aborted at /usr/share/debconf/frontend line 6.
dpkg: 处理软件包 wireshark-common (--remove)时出错：
已安装 wireshark-common 软件包 post-removal 脚本 子进程返回错误状态 2
在处理时有错误发生：
wireshark-common
E: Sub-process /usr/bin/dpkg returned an error code (1)

wiki.deepin.org 搜索下error code

我看着这个应该是这个软件包的卸载脚本有问题导致dpkg出错，可以尝试重装系统

问提还是没有解决，不过非常感谢有人能回复
                              
lmm@lmm-PC:~$ sudo apt-get dist-upgrade
正在读取软件包列表... 完成
正在分析软件包的依赖关系树      
正在读取状态信息... 完成      
正在计算更新... 完成
下列【新】软件包将被安装：
。。。。。。
(正在读取数据库 ... 系统当前共安装有 184693 个文件和目录。)
准备解压 .../libc-bin_2.28.8-2+rebuild_amd64.deb  ...
正在解压 libc-bin (2.28.8-2+rebuild) 并覆盖 (2.28.7-1+deepin) ...
正在设置 libc-bin (2.28.8-2+rebuild) ...
ldconfig: file /lib/x86_64-linux-gnu/libgstaudio-1.0.so.0 is truncated

ldconfig: File /lib/x86_64-linux-gnu/libgstapp-1.0.so.0 is empty, not checked.
ldconfig: File /lib/x86_64-linux-gnu/libgstbase-1.0.so.0.1404.0 is empty, not checked.
ldconfig: File /lib/x86_64-linux-gnu/libgstbase-1.0.so.0 is empty, not checked.
ldconfig: file /lib/x86_64-linux-gnu/libgstaudio-1.0.so.0.1404.0 is truncated

ldconfig: File /lib/x86_64-linux-gnu/libgstbadaudio-1.0.so.0 is empty, not checked.
ldconfig: File /lib/x86_64-linux-gnu/libgstapp-1.0.so.0.1404.0 is empty, not checked.
ldconfig: File /lib/x86_64-linux-gnu/libgstbadaudio-1.0.so.0.1404.0 is empty, not checked.
(正在读取数据库 ... 系统当前共安装有 184693 个文件和目录。)
准备解压 .../libc-l10n_2.28.8-2+rebuild_all.deb  ...
正在解压 libc-l10n (2.28.8-2+rebuild) 并覆盖 (2.28.7-1+deepin) ...
准备解压 .../libc-dev-bin_2.28.8-2+rebuild_amd64.deb  ...
正在解压 libc-dev-bin (2.28.8-2+rebuild) 并覆盖 (2.28.7-1+deepin) ...
准备解压 .../libc6-dev_2.28.8-2+rebuild_amd64.deb  ...
正在解压 libc6-dev:amd64 (2.28.8-2+rebuild) 并覆盖 (2.28.7-1+deepin) ...
准备解压 .../locales_2.28.8-2+rebuild_all.deb  ...
正在解压 locales (2.28.8-2+rebuild) 并覆盖 (2.28.7-1+deepin) ...
准备解压 .../libc6_2.28.8-2+rebuild_amd64.deb  ...
Can't load '/usr/lib/x86_64-linux-gnu/perl/5.28/auto/re/re.so' for module re: /usr/lib/x86_64-linux-gnu/perl/5.28/auto/re/re.so: file too short at /usr/share/perl/5.28/XSLoader.pm line 93.
at /usr/lib/x86_64-linux-gnu/perl/5.28/re.pm line 89.
Compilation failed in require at /usr/share/perl/5.28/Text/Wrap.pm line 58.
BEGIN failed--compilation aborted at /usr/share/perl/5.28/Text/Wrap.pm line 58.
Compilation failed in require at /usr/share/perl5/Debconf/Template.pm line 10.
BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Template.pm line 10.
Compilation failed in require at /usr/share/perl5/Debconf/Question.pm line 8.
BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Question.pm line 8.
Compilation failed in require at /usr/share/perl5/Debconf/Config.pm line 7.
BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Config.pm line 7.
Compilation failed in require at /usr/share/perl5/Debconf/Log.pm line 10.
Compilation failed in require at /usr/share/perl5/Debconf/Db.pm line 7.
BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Db.pm line 7.
Compilation failed in require at /usr/share/debconf/frontend line 6.
BEGIN failed--compilation aborted at /usr/share/debconf/frontend line 6.
dpkg: 处理归档 /var/cache/apt/archives/libc6_2.28.8-2+rebuild_amd64.deb (--unpack)时出错：
新的 libc6:amd64 软件包 pre-installation 脚本 子进程返回错误状态 2
在处理时有错误发生：
/var/cache/apt/archives/libc6_2.28.8-2+rebuild_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
lmm@lmm-PC:~$ cd /var/lib/dpkg
lmm@lmm-PC:/var/lib/dpkg$ sudo mv info info.bak
lmm@lmm-PC:/var/lib/dpkg$ sudo mkdir info
lmm@lmm-PC:/var/lib/dpkg$
lmm@lmm-PC:/var/lib/dpkg$ sudo dpkg --configure -a
正在设置 libc-l10n (2.28.8-2+rebuild) ...
正在设置 locales (2.28.8-2+rebuild) ...
dpkg: 依赖关系问题使得 libc6-dev:amd64 的配置工作不能继续：
libc6-dev:amd64 依赖于 libc6 (= 2.28.8-2+rebuild)；然而：
系统中 libc6:amd64 的版本为 2.28.7-1+deepin。

dpkg: 处理软件包 libc6-dev:amd64 (--configure)时出错：
依赖关系问题 - 仍未被配置
正在设置 libc-dev-bin (2.28.8-2+rebuild) ...
正在处理用于 libc-bin (2.28.8-2+rebuild) 的触发器 ...
正在处理用于 man-db (2.8.5-2) 的触发器 ...
正在处理用于 shared-mime-info (1.10-1) 的触发器 ...
正在处理用于 hicolor-icon-theme (0.17-2) 的触发器 ...
在处理时有错误发生：
libc6-dev:amd64
lmm@lmm-PC:/var/lib/dpkg$

问提还是没有解决，不过非常感谢
我重装了很多次都没有用，
deepin15.11的就正常但是系统反应慢

本帖最后由 haohu1193 于 2020-8-16 20:53 编辑

别折腾了...熬几天...不出大的问题下个星期应该会出完整的安装镜像...下个星期出来不了就是这个月一定出...官方目前就是这样说的...

好的，静静滴等侯，我是想试用ZWcad4.0

一条心等5.7内核出来就可以解决一部分安装使用的问题了...但愿你的电脑也再其中...

解决了一个问题新的问题又来