新装了deepin 15.11，安装完后，没有无线链接。网卡型号是Broadcom Limited BCM4356 802.11ac Wireless Network Adapter (rev 02)，这个网卡好像是无线和蓝牙二合一的。请问怎样才能装上无线网卡驱动和蓝牙驱动？照着论坛上其他帖子的方法弄了，没成功。。。。
~$ lspci -vvv
00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
        Subsystem: Intel Corporation Broadwell-U Host Bridge -OPI
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- <ERR- INTx-
        Latency: 0
        Capabilities:
        Kernel driver in use: bdw_uncore

00:02.0 VGA compatible controller: Intel Corporation HD Graphics 5300 (rev 09) (prog-if 00 [VGA controller])
        Subsystem: Intel Corporation HD Graphics 5300
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- <ERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 45
        Region 0: Memory at f6000000 (64-bit, non-prefetchable) [size=16M]
        Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at f000
        [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
        Capabilities:
        Kernel driver in use: i915
        Kernel modules: i915

00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
        Subsystem: Intel Corporation Broadwell-U Audio Controller
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- <ERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 48
        Region 0: Memory at f751c000 (64-bit, non-prefetchable) [size=16K]
        Capabilities:
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:04.0 Signal processing controller: Intel Corporation Broadwell-U Processor Thermal Subsystem (rev 09)
        Subsystem: Intel Corporation Broadwell-U Processor Thermal Subsystem
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- <ERR- INTx-
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f7510000 (64-bit, non-prefetchable) [size=32K]
        Capabilities:
        Kernel driver in use: proc_thermal
        Kernel modules: processor_thermal_device

00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03) (prog-if 30 [XHCI])
        Subsystem: Intel Corporation Wildcat Point-LP USB xHCI Controller
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- <ERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 43
        Region 0: Memory at f7500000 (64-bit, non-prefetchable) [size=64K]
        Capabilities:
        Kernel driver in use: xhci_hcd

00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)
        Subsystem: Intel Corporation Wildcat Point-LP MEI Controller
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- <ERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 46
        Region 0: Memory at f7524000 (64-bit, non-prefetchable)
        Capabilities:
        Kernel driver in use: mei_me
        Kernel modules: mei_me

00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
        Subsystem: Realtek Semiconductor Co., Ltd. Wildcat Point-LP High Definition Audio Controller
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- <ERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 47
        Region 0: Memory at f7518000 (64-bit, non-prefetchable) [size=16K]
        Capabilities:
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 (rev e3) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- <ERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 42
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: f7000000-f74fffff
        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- ERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities:
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
        Subsystem: Intel Corporation Wildcat Point-LP LPC Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- <ERR- INTx-
        Latency: 0
        Capabilities:
        Kernel driver in use: lpc_ich
        Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03) (prog-if 01 [AHCI 1.0])
        Subsystem: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 0
        Interrupt: pin B routed to IRQ 44
        Region 0: I/O ports at f0b0
        Region 1: I/O ports at f0a0
        Region 2: I/O ports at f090
        Region 3: I/O ports at f080
        Region 4: I/O ports at f060
        Region 5: Memory at f7522000 (32-bit, non-prefetchable) [size=2K]
        Capabilities:
        Kernel driver in use: ahci
        Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
        Subsystem: Intel Corporation Wildcat Point-LP SMBus Controller
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Interrupt: pin C routed to IRQ 18
        Region 0: Memory at f7521000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at f040
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801

00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP Thermal Management Controller (rev 03)
        Subsystem: Intel Corporation Wildcat Point-LP Thermal Management Controller
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-         Interrupt: pin C routed to IRQ 18
        Region 0: Memory at f7520000 (64-bit, non-prefetchable) [size=4K]
        Capabilities:
        Kernel driver in use: intel_pch_thermal
        Kernel modules: intel_pch_thermal

01:00.0 Network controller: Broadcom Limited BCM4356 802.11ac Wireless Network Adapter (rev 02)
        Subsystem: Gemtek Technology Co., Ltd BCM4356 802.11ac Wireless Network Adapter
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-         Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 49
        Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=32K]
        Region 2: Memory at f7000000 (64-bit, non-prefetchable) [size=4M]
        Capabilities:
        Kernel driver in use: brcmfmac
        Kernel modules: brcmfmac