USB无线网卡不能用[TP-Link]
Tofloor
poster avatar
Maicss
deepin
2019-08-05 23:37
Author
本帖最后由 maicss 于 2019-8-5 17:03 编辑

如题,使用lsusb获取的信息如下Bus 001 Device 015: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
从网上尝试了各种方法皆失败
无论是官方的还是开源的驱动全部编译失败
安装firmware-realtek后仍然不可用
求解决办法https://bbs.deepin.org/user/101846

刚刚联系客服(tplink)并未提供有价值的回复,只能是希望论坛的小伙伴帮忙解决一下了。
下面是驱动的下载地址https://www.mediatek.com/products/broadbandWifi/mt7601u
下面是驱动文件DPO_MT7601U_LinuxSTA_3.0.0.4_20130913.zip
Reply Favorite View the author
All Replies
1 / 2
To page
avatar
xcb
deepin
2019-08-06 01:24
#1
我也是同样的usb无线网卡,在Mint19.1编译驱动后ok,在Deepin15.10.2和15.11折腾了一个星期了,怎么都不行,同求高手解决.
Reply View the author
avatar
deepin157
deepin
2019-08-06 01:29
#2
我很幸运,也是TP的无线网卡,安装好系统就自动识别了,并能正常上网。
Reply View the author
avatar
funtoo
deepin
2019-08-06 01:53
#3
安装linux-firmware这个包,里面有mt7601u.bin这个固件文件。MediaTek的芯片固件没有单独拆包。
不行的话再贴一下手动编译驱动的报错,否则无法诊断。
Reply View the author
avatar
aida
deepin
2019-08-06 02:09
#4
linux-firmware 或者firmware-misc-nonfree

这俩包有冲突 用一个就可以了

* MediaTek MT7601U firmware, version 34 (mt7601u.bin)


安装完成之后重启,试一下
Reply View the author
avatar
Maicss
deepin
2019-08-06 04:45
#5
https://bbs.deepin.org/post/181616
linux-firmware 或者firmware-misc-nonfree

这俩包有冲突 用一个就可以了

linux-firmware已经安装,仍然无法使用。
Reply View the author
avatar
flyk
deepin
2019-08-06 05:23
#6
本帖最后由 flyk 于 2019-8-5 21:47 编辑

mac80211或者cfg80211之类的模块都加载了吗?
Reply View the author
avatar
aida
deepin
2019-08-06 17:07
#7
https://bbs.deepin.org/post/181616
linux-firmware已经安装,仍然无法使用。

请发一下 sudo dmesg 的输出
Reply View the author
avatar
Maicss
deepin
2019-08-07 02:22
#8
https://bbs.deepin.org/post/181616
mac80211或者cfg80211之类的模块都加载了吗?

抱歉,我是小白,这怎么看?
Reply View the author
avatar
Maicss
deepin
2019-08-07 02:27
#9
https://bbs.deepin.org/post/181616
请发一下 sudo dmesg 的输出

有点长
[    0.000000] Linux version 4.15.0-30deepin-generic (pbuilder@zs-PC) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #31 SMP Fri Nov 30 04:29:02 UTC 2018 (Ubuntu 4.15.0-30deepin.31-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-30deepin-generic root=UUID=20fd7e3d-e298-4ad9-84ba-804a4b60ea8a ro splash quiet DEEPIN_GFXMODE=1,1024x768,1366x768
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x0000000098d07fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000098d08000-0x0000000098d37fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000098d38000-0x0000000098e71fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000098e72000-0x00000000993a0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000993a1000-0x0000000099b2dfff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000099b2e000-0x0000000099b8efff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000099b8f000-0x0000000099b8ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000099b90000-0x0000000099bd1fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000099bd2000-0x0000000099d47fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000099d48000-0x0000000099ff9fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000099ffa000-0x0000000099ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ESRT=0x99b2a198  ACPI=0x98ef6000  ACPI 2.0=0x98ef6000  SMBIOS=0x99a78d98
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. X550MJ/X550MJ, BIOS X550MJ.301 11/03/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x260000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 09A000000 mask FFE000000 uncachable
[    0.000000]   3 base 09C000000 mask FFC000000 uncachable
[    0.000000]   4 base 100000000 mask F00000000 write-back
[    0.000000]   5 base 200000000 mask F00000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 10656M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K
Reply View the author
avatar
Maicss
deepin
2019-08-07 02:30
#10
https://bbs.deepin.org/post/181616
请发一下 sudo dmesg 的输出

上边的好像不完整,我只发usb1(插网卡的口)的吧
[  218.680898] usb 1-1: new high-speed USB device number 4 using xhci_hcd
[  218.830028] usb 1-1: New USB device found, idVendor=148f, idProduct=2878
[  218.830032] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  218.830035] usb 1-1: Product: Љ
[  218.830037] usb 1-1: Manufacturer: Љ
[  219.472191] usb-storage 1-1:1.0: USB Mass Storage device detected
[  219.475750] scsi host2: usb-storage 1-1:1.0
[  219.476444] usbcore: registered new interface driver usb-storage
[  219.503788] usbcore: registered new interface driver uas
[  219.641105] usb 1-1: USB disconnect, device number 4
[  220.085105] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[  220.244501] usb 1-1: New USB device found, idVendor=148f, idProduct=7601
[  220.244518] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  220.244528] usb 1-1: Product: 802.11 n WLAN
[  220.244538] usb 1-1: Manufacturer: MediaTek
[  220.244547] usb 1-1: SerialNumber: 1.0
[  218.680898] usb 1-1: new high-speed USB device number 4 using xhci_hcd
[  218.830028] usb 1-1: New USB device found, idVendor=148f, idProduct=2878
[  218.830032] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  218.830035] usb 1-1: Product: Љ
[  218.830037] usb 1-1: Manufacturer: Љ
[  219.472191] usb-storage 1-1:1.0: USB Mass Storage device detected
[  219.475750] scsi host2: usb-storage 1-1:1.0
[  219.476444] usbcore: registered new interface driver usb-storage
[  219.503788] usbcore: registered new interface driver uas
[  219.641105] usb 1-1: USB disconnect, device number 4
[  220.085105] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[  220.244501] usb 1-1: New USB device found, idVendor=148f, idProduct=7601
[  220.244518] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  220.244528] usb 1-1: Product: 802.11 n WLAN
[  220.244538] usb 1-1: Manufacturer: MediaTek
[  220.244547] usb 1-1: SerialNumber: 1.0
[  218.680898] usb 1-1: new high-speed USB device number 4 using xhci_hcd
[  218.830028] usb 1-1: New USB device found, idVendor=148f, idProduct=2878
[  218.830032] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  218.830035] usb 1-1: Product: Љ
[  218.830037] usb 1-1: Manufacturer: Љ
[  219.472191] usb-storage 1-1:1.0: USB Mass Storage device detected
[  219.475750] scsi host2: usb-storage 1-1:1.0
[  219.476444] usbcore: registered new interface driver usb-storage
[  219.503788] usbcore: registered new interface driver uas
[  219.641105] usb 1-1: USB disconnect, device number 4
[  220.085105] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[  220.244501] usb 1-1: New USB device found, idVendor=148f, idProduct=7601
[  220.244518] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  220.244528] usb 1-1: Product: 802.11 n WLAN
[  220.244538] usb 1-1: Manufacturer: MediaTek
[  220.244547] usb 1-1: SerialNumber: 1.0
Reply View the author
avatar
aida
deepin
2019-08-07 02:59
#11
发的不全

sudo dmesg  >>  1.log

把1.log发上来吧
Reply View the author
avatar
Maicss
deepin
2019-08-07 03:04
#12
https://bbs.deepin.org/post/181616
发的不全

sudo dmesg  >>  1.log

1.log.zip
Reply View the author
avatar
carbotexlu510309
deepin
2019-08-07 07:36
#13
我的tp-link无线网卡系统也可以识别出来。
Reply View the author
avatar
Maicss
deepin
2019-08-08 16:14
#14
https://bbs.deepin.org/post/181616
发的不全

sudo dmesg  >>  1.log

你好,收到了吗,怎么这么长时间没有回复?
不会是无解吧
Reply View the author
avatar
aida
deepin
2019-08-08 17:17
#15
https://bbs.deepin.org/post/181616
你好,收到了吗,怎么这么长时间没有回复?
不会是无解吧

    git clone https://github.com/porjo/mt7601
    cd mt7601/src/
    make
    sudo mv mcu/bin/MT7601.bin /lib/firmware/mt7601u.bin


内核显示固件丢失
Reply View the author
avatar
Maicss
deepin
2019-08-08 17:33
#16
https://bbs.deepin.org/post/181616
git clone https://github.com/porjo/mt7601
    cd mt7601/src/
    make

这个项目显示not found
Reply View the author
avatar
Maicss
deepin
2019-08-08 18:16
#17
https://bbs.deepin.org/post/181616
git clone https://github.com/porjo/mt7601
    cd mt7601/src/
    make

我又找到了另一个项目,按你说的做之后重启电脑依然无法使用,make的时候有一些报错,开机的时候也会有报错,下面是make的输出
make.log.zip
Reply View the author
avatar
aida
deepin
2019-08-08 18:42
#18
https://bbs.deepin.org/post/181616
我又找到了另一个项目,按你说的做之后重启电脑依然无法使用,make的时候有一些报错,开机的时候也会有报 ...

这个好像是内核的原因。。
Reply View the author
avatar
Maicss
deepin
2019-08-08 18:51
#19
https://bbs.deepin.org/post/181616
这个好像是内核的原因。。

也就是说下一次升级内核有望解决?
Reply View the author
avatar
talon0011
deepin
2019-08-08 19:12
#20
不要使用tp 这种垃圾硬件……  臭名昭著
Reply View the author
1 / 2
To page