• Home
  • Categories
  • WIKI
  • LANGUAGE: en
    • tplink 无线网卡驱动 下载安装
    Theme area 2198 views · 1 replies ·
    Tofloor
    poster avatar
    wukong_android
    deepin
    2019-07-29 20:25
    Author
    本帖最后由 wukong_android 于 2019-7-29 12:26 编辑

    下载地址  https://github.com/rainbow-cnay/rtl8821cu-nvidia-jetson-nano

    在Jetson Nano上直接编译会失败，因为在系统中还做了一些修改。可以clone后，用 sudo make install 直接安装使用。
    我刚买了Tenda U9，算比较便宜，在WIN系统上正常，速度还可以。但在JETSON NANO上没有驱动可用，驱动是为x86_64设计的。 直接编译不成功，我用非常笨拙的方法修改了下，编译成功，使用正常。 请参考 https://github.com/MingxuZhang/rtl8821cu 里的安装方法。重点是：
    Plug your USB-wifi-adapter into your PC If wifi can be detected, congratulations. If not, maybe you need to switch your device usb mode by the following steps in terminal:
    find your usb-wifi-adapter device ID, like "0bda:1a2b", by type: lsusb
    switch the mode by type: (the device ID must be yours.) sudo usb_modeswitch -KW -v 0bda -p 1a2b It should work.
    使用时要切换一下网卡的模式，才可工作。实际上可以用脚本，检测到此设备插入时，自动执行usb_modeswitch。
    以下为原信息。
    Realtek RTL8811CU/RTL8821CU USB wifi adapter driver version 5.4.1 for Linux 4.4.x up to 5.1.x
    Before build this driver make sure make, gcc, linux-header and git have been installed.
    First, clone this repositorymkdir -p ~/buildcd ~/buildgit clone https://github.com/brektrou/rtl8821CU.gitBuild and install with DKMS
    DKMS is a system which will automatically recompile and install a kernel module when a new kernel gets installed or updated. To make use of DKMS, install the dkms package.
    Debian/Ubuntu:sudo apt-get install dkmsArch Linux/Manjaro:sudo pacman -S dkms
    To make use of the DKMS feature with this project, just run:
    ./dkms-install.sh
    If you later on want to remove it, run:
    ./dkms-remove.shBuild and install without DKMS
    Use following commands:
    cd ~/build/rtl8821CUmakesudo make install
    If you later on want to remove it, do the following:
    cd ~/build/rtl8821CUsudo make uninstallChecking installed driver
    If you successfully install the driver, the driver is installed on /lib/modules//kernel/drivers/net/wireless/realtek/rtl8821cu. Check the driver with the ls command:
    ls /lib/modules/$(uname -r)/kernel/drivers/net/wireless/realtek/rtl8821cu
    Make sure 8821cu.ko file present on that directory
    Check with DKMS (if installing via DKMS):
    sudo dkms status

    Reply Favorite View the author
    All Replies
    avatar
    wukong_android
    deepin
    2019-07-29 20:27
    #1
    亲自测试有用，分享给大家
    Reply View the author