深度15.10.2系统没有声音
Tofloor
poster avatar
george
deepin
2019-07-14 21:46
Author
GVNXUHI一体机安装深度后,“声音-高级设置-输出”里有3项,如图。
Reply Favorite View the author
All Replies
avatar
george
deepin
2019-07-14 21:55
#1
尝试用“PulseAudio音量控制”,仍没有声音。如图:
Reply View the author
avatar
fyzz
deepin
2019-07-14 22:02
#2
重启重启重启
Reply View the author
avatar
george
deepin
2019-07-14 22:07
#3

每选择一个不同的设备就重启一次哦,不行。
Reply View the author
avatar
走钢丝
deepin
2019-07-14 22:09
#4
我前几天也试过 hdmi,输出音频没什么问题。
Reply View the author
avatar
george
deepin
2019-07-14 22:38
#5
一体机显示器上的HDMI可能不一样吧
Reply View the author
avatar
george
deepin
2019-07-14 22:49
#6
aplay -l命令执行后显示如下:
**** List of PLAYBACK Hardware Devices ****
card 0: Audio [Intel HDMI/DP LPE Audio], device 0: HdmiLpeAudio [Intel HDMI/DP LPE Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Audio [Intel HDMI/DP LPE Audio], device 1: HdmiLpeAudio [Intel HDMI/DP LPE Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: bytcrrt*5640 [bytcr-rt*5640], device 0: Baytrail Audio (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: bytcrrt*5640 [bytcr-rt*5640], device 1: Deep-Buffer Audio (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0


新增配置文件: /etc/asound.conf
defaults.pcm.card 1
defaults.pcm.device 0
defaults.ctl.card 1


问题还是没有解决。
Reply View the author
avatar
cy844757727
deepin
2019-07-15 04:47
#7
https://bbs.deepin.org/post/180618
aplay -l命令执行后显示如下:
**** List of PLAYBACK Hardware Devices ****
card 0: Audio , device 0: H ...

你是双系统吗,你可以这样试试:
启动到win下,把快速启动关闭掉。然后关机,强调是关机不是重启。然后在开机到deepin下,看看有没有声音
Reply View the author
avatar
george
deepin
2019-07-15 21:49
#8
是台一体机,单系统。
Reply View the author