中文 
152******88
deepin
2019-02-14 12:10 deepin 有滑有大侠帮一下呀
Reply Like 0 View the author
All Replies
#1
thinking2019 deepin
2019-02-15 02:48 deepin 我也是这款机器，装完Deepin之后除了触摸屏和声卡问题无法解决之外，其他的还不错。蓝牙我用不着，所以无视。作为备用机，还可以。
Reply Like 0 View the author
152******88 deepin
2019-02-15 21:03 deepin 本帖最后由 wzkjzx 于 2019-2-15 13:06 编辑
这机器小，好带。装了deepin系统运行很流畅，办工没压力。想放在车上随身带，没有蓝牙蓝牙鼠标不能用，没有声音看个电影都不成呀。
https://bbs.deepin.org/post/174525
我也是这款机器，装完Deepin之后除了触摸屏和声卡问题无法解决之外，其他的还不错。蓝牙我用不着，所以无视 ...
这机器小，好带。装了deepin系统运行很流畅，办工没压力。想放在车上随身带，没有蓝牙蓝牙鼠标不能用，没有声音看个电影都不成呀。
Reply Like 0 View the author
152******88 deepin
2019-02-16 05:35 deepin 请帮忙呀
Reply Like 0 View the author
thinking2019 deepin
2019-02-17 03:04 deepin 别用蓝牙鼠标，我用的是罗技的无线鼠标，完美支持。
Reply Like 0 View the author
152******88 deepin
2019-02-17 03:41 deepin https://bbs.deepin.org/post/174525
别用蓝牙鼠标，我用的是罗技的无线鼠标，完美支持。
看到有新消息我以为是官方或是有大佬回应了呢，害我高兴得。
本来就只有一个U口，带出门还得带一个USB集线器。
Reply Like 0 View the author
152******88 deepin
2019-02-17 09:20 deepin 这个声卡和触摸屏还有蓝牙的问题是不是很难？为什么都没有回应呢？
Reply Like 0 View the author
superendermansm
deepin
2019-02-20 20:06 deepin wzkjzx 发表于 2019-2-17 01:20
这个声卡和触摸屏还有蓝牙的问题是不是很难？为什么都没有回应呢？
触摸屏目前deepin还在艰难适配。。。话说目前触摸屏的设备不算太多，deepin工程师应该还在填坑补bug与开发新版本，可能优先级不太高
声卡，蓝牙应该是驱动的问题（Linux通病，占有率太低，如果有巨硬的一半情况会大大改观），查一下具体型号，自己编译一下试试看。如果不会编译的话。。，问论坛的大佬吧，我一热心小白也不会（笑哭）
Reply Like 0 View the author
Please sign in first
wcy@wcy-PC:~$ pacmd list-cards
1 card(s) available.
index: 0
name:
driver:
owner module: 6
properties:
alsa.card = "0"
alsa.card_name = "Intel HDMI/DP LPE Audio"
alsa.long_card_name = "Intel HDMI/DP LPE Audio"
alsa.driver_name = "snd_hdmi_lpe_audio"
device.bus_path = "pci-0000:00:02.0-platform-hdmi-lpe-audio"
sysfs.path = "/devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "22b0"
device.product.name = "Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers"
device.string = "0"
device.description = "Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:analog-stereo: 模拟立体声 输出 (priority 6000, available: unknown)
output:hdmi-stereo: Digital Stereo (HDMI) 输出 (priority 5400, available: unknown)
output:hdmi-surround: Digital Surround 5.1 (HDMI) 输出 (priority 300, available: unknown)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) 输出 (priority 300, available: unknown)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) 输出 (priority 5200, available: unknown)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) 输出 (priority 100, available: unknown)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) 输出 (priority 100, available: unknown)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) 输出 (priority 5200, available: unknown)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) 输出 (priority 100, available: unknown)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) 输出 (priority 100, available: unknown)
off: 关 (priority 0, available: unknown)
active profile:
sinks:
alsa_output.pci-0000_00_02.0-platform-hdmi-lpe-audio.analog-stereo/#0: Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers 模拟立体声
sources:
alsa_output.pci-0000_00_02.0-platform-hdmi-lpe-audio.analog-stereo.monitor/#0: Monitor of Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers 模拟立体声
ports:
analog-output: 模拟输出 (priority 9900, latency offset 0 usec, available: unknown)
properties:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "video-display"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "video-display"
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "video-display"
wcy@wcy-PC:~$ pacmd list-sinks
1 sink(s) available.
* index: 0
name:
driver:
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9059
volume: front-left: 58523 / 89% / -2.95 dB, front-right: 58523 / 89% / -2.95 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
立体声
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.18 ms
card: 0
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "Intel HDMI/DP LPE Audio"
alsa.id = "HdmiLpeAudio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "Intel HDMI/DP LPE Audio"
alsa.long_card_name = "Intel HDMI/DP LPE Audio"
alsa.driver_name = "snd_hdmi_lpe_audio"
device.bus_path = "pci-0000:00:02.0-platform-hdmi-lpe-audio"
sysfs.path = "/devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "22b0"
device.product.name = "Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers"
device.string = "hw:0"
device.buffering.buffer_size = "352832"
device.buffering.fragment_size = "352832"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "模拟立体声"
device.description = "Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers 模拟立体声"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output: 模拟输出 (priority 9900, latency offset 0 usec, available: unknown)
properties:
active port:
没有蓝牙
wcy@wcy-PC:~$ sudo rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no