Intel Cherry Trail X5-Z8300的CPU，安装deepin15.5,15.6,15.7都没声音运行alsamixer，按F6后，选择Intel HDMI/DP LPE Audio后，显示This sound device does not have any controls.



终端运行命令pacmd list-cards后显示
1 card(s) available.
    index: 0
        name:
        driver:
        owner module: 6
        properties:
                alsa.card = "0"
                alsa.card_name = "Intel HDMI/DP LPE Audio"
                alsa.long_card_name = "Intel HDMI/DP LPE Audio"
                alsa.driver_name = "snd_hdmi_lpe_audio"
                device.bus_path = "pci-0000:00:02.0-platform-hdmi-lpe-audio"
                sysfs.path = "/devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "22b0"
                device.product.name = "Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers"
                device.string = "0"
                device.description = "Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        profiles:
                output:analog-stereo: 模拟立体声 输出 (priority 6000, available: unknown)
                output:hdmi-stereo: Digital Stereo (HDMI) 输出 (priority 5400, available: unknown)
                output:hdmi-surround: Digital Surround 5.1 (HDMI) 输出 (priority 300, available: unknown)
                output:hdmi-surround71: Digital Surround 7.1 (HDMI) 输出 (priority 300, available: unknown)
                output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) 输出 (priority 5200, available: unknown)
                output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) 输出 (priority 100, available: unknown)
                output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) 输出 (priority 100, available: unknown)
                output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) 输出 (priority 5200, available: unknown)
                output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) 输出 (priority 100, available: unknown)
                output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) 输出 (priority 100, available: unknown)
                off: 关 (priority 0, available: unknown)
        active profile:
        sinks:
                alsa_output.pci-0000_00_02.0-platform-hdmi-lpe-audio.analog-stereo/#0: Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers 模拟立体声
        sources:
                alsa_output.pci-0000_00_02.0-platform-hdmi-lpe-audio.analog-stereo.monitor/#0: Monitor of Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers 模拟立体声
        ports:
                analog-output: 模拟输出 (priority 9900, latency offset 0 usec, available: unknown)
                        properties:
                               
                hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "video-display"
                hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "video-display"
                hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "video-display"


运行命令pacmd list-sinks后显示

1 sink(s) available.
  * index: 0
        name:
        driver:
        flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 9059
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max request: 0 KiB
        max rewind: 0 KiB
        monitor source: 0
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     立体声
        used by: 0
        linked by: 0
        configured latency: 0.00 ms; range is 0.50 .. 2000.18 ms
        card: 0
        module: 6
        properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "Intel HDMI/DP LPE Audio"
                alsa.id = "HdmiLpeAudio"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "0"
                alsa.card_name = "Intel HDMI/DP LPE Audio"
                alsa.long_card_name = "Intel HDMI/DP LPE Audio"
                alsa.driver_name = "snd_hdmi_lpe_audio"
                device.bus_path = "pci-0000:00:02.0-platform-hdmi-lpe-audio"
                sysfs.path = "/devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "22b0"
                device.product.name = "Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers"
                device.string = "hw:0"
                device.buffering.buffer_size = "352832"
                device.buffering.fragment_size = "352832"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "模拟立体声"
                device.description = "Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers 模拟立体声"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        ports:
                analog-output: 模拟输出 (priority 9900, latency offset 0 usec, available: unknown)
                        properties:
                               
        active port:


目前已经安装pulseaudio，依旧没有任何声音，喇叭耳机都没声音。
求助各位大神！蓝牙可以不用，wifi网卡可以用外置的，但是声音还是很必要的.