【求助】)战神Z7KP7D2纯小白非常想用deepin系统,蛋总出错
Tofloor
poster avatar
cherishaut
deepin
2018-08-18 22:36
Author
本帖最后由 cherishaut 于 2018-8-18 16:42 编辑

进不去系统,开机画面没有,deepin标志都没看见,情况如图,用的U盘安装的
战神Z7-KP7D2,左边没有USB口的那款简配版,GE5S01
Reply Favorite View the author
All Replies
avatar
中国新蔡
deepin
2018-08-18 22:50
#1
好事多磨,多试几遍,说不定就好了,哈哈!
Reply View the author
avatar
zwq133
deepin
2018-08-18 23:20
#2
"蛋总出错"。。。。。那就把蛋煮了。
Reply View the author
avatar
cherishaut
deepin
2018-08-19 00:13
#3
https://bbs.deepin.org/post/167230
好事多磨,多试几遍,说不定就好了,哈哈!

磨了好几次了,有点紧,进不去,卡的我也疼啊
Reply View the author
avatar
cherishaut
deepin
2018-08-19 00:15
#4
https://bbs.deepin.org/post/167230
用的是联想电脑吗?

不是。战神Z7-KP7D2,左边没有USB口的那款简配版,GE5S01
Reply View the author
avatar
cherishaut
deepin
2018-08-19 00:16
#5
https://bbs.deepin.org/post/167230
"蛋总出错"。。。。。那就把蛋煮了。

瓜熟蛋落
Reply View the author
avatar
cherishaut
deepin
2018-08-19 23:07
#6
https://bbs.deepin.org/post/167230
我的电脑也卡得不要不 要的

我是卡在这些字母这,就不去了,这些字母膜太厚了
Reply View the author
avatar
mingy
deepin
2018-08-20 02:20
#7
你可以直接百度AE_NOT_FOUND 和 tbxfload看一下。
Reply View the author
avatar
cherishaut
deepin
2018-08-20 18:17
#8
https://bbs.deepin.org/post/167230
对了,你是用什么工具制作的USB启动盘呢?
深度提供的工具吗?
还是软碟通呢?

就是Deepin系统ISO里面那个U盘制作工具
Reply View the author
avatar
cherishaut
deepin
2018-08-20 18:19
#9
https://bbs.deepin.org/post/167230
你可以直接百度AE_NOT_FOUND 和 tbxfload看一下。

以前从没接触过Linux,镇是看不懂啊
Reply View the author
avatar
liuguangjingshang
deepin
2018-08-20 18:41
#10
头像搞事,警告一次
Reply View the author
avatar
mingy
deepin
2018-08-20 19:05
#11
https://bbs.deepin.org/post/167230
以前从没接触过Linux,镇是看不懂啊

这个问题好像涉及到内核,看了下网上的回复
有几种可能有用的方法:
1.更新bios
2.如果能进入其他终端,更新一下microcode:sudo apt intall interl-microcode 或 sudo apt install amd-microcode
3.启动项添加acpi=off参数,禁用acpi。或者禁用具体某个模块,不过我也不能你这是哪个模块的问题。
Reply View the author
avatar
successfully
deepin
2018-08-20 19:38
#12
把头像换了就能用了!
Reply View the author
avatar
cherishaut
deepin
2018-08-20 23:46
#13
https://bbs.deepin.org/post/167230
头像搞事,警告一次

正经头像,不要多想
Reply View the author
avatar
199******12
deepin
2018-08-21 05:00
#14
https://bbs.deepin.org/post/167230
用的是联想电脑吗?

楼主说了是战神呢
Reply View the author
avatar
199******12
deepin
2018-08-21 05:03
#15
https://bbs.deepin.org/post/167230
正经头像,不要多想

让大家说下你这头像,明天我上线还没更换的话就禁了(算是警告)
Reply View the author
avatar
cherishaut
deepin
2018-08-21 05:31
#16
https://bbs.deepin.org/post/167230
让大家说下你这头像,明天我上线还没更换的话就禁了(算是警告)

为啥换了还是这个
Reply View the author
avatar
GC6174
deepin
2018-08-22 09:09
#17
我的电脑是战神Z7M-KP7GC配置差不太多,我分享一下我的安装经验,用deepin官方工具制作启动盘,安装时如果卡logo,重启列表按e键修改splash quick删掉并在删除位置添加acpi_osi=!,按F10,安装,安装完成后进入系统前还是删除splash quick并在删除位置添加改成acpi_osi=!,F10,应该不会卡logo或者卡命令界面,进入系统后,进入终端,sudo vim /etc/default/grub,找到开机前删除的两个字母位置,删除并添加acpi_osi=!,然后按ESC键,按:键,按wq!键回车,修改好文件后,sudo update-grub,更新完grub文件,重启电脑,应该就不会进不去系统了,还有你电脑应该没有无线网选项,主要是没有驱动,如果没有无线网选项,看下你的无线网卡型号,百度去下载安装。
Reply View the author
avatar
188******56
deepin
2018-08-23 07:31
#18
https://bbs.deepin.org/post/167230
@wffger 你也遇到过类似问题,后来是怎么解决的呢?
愿意分享一下吗?

换内核进系统
Reply View the author
avatar
自由鸟
deepin
2018-08-23 16:38
#19
无特殊要求,试试linuxmint19看看
Reply View the author
avatar
bfx120
deepin
2018-08-23 17:08
#20
战神z7 kp7s1路过,我是关闭核显卡才可以的,启动不用uefi
Reply View the author