Results generated by fwts: Version V17.09.00 (2017-09-27 07:09:03).
Some of this work - Copyright (c) 1999 - 2017, Intel Corp. All rights reserved.
Some of this work - Copyright (c) 2010 - 2017, Canonical.
Some of this work - Copyright (c) 2016 - 2017, IBM.
Some of this work - Copyright (c) 2017, ARM Ltd.
This test run on 06/05/18 at 15:11:48 on host Linux ifang-PC
4.14.0-deepin2-amd64 #1 SMP PREEMPT Deepin 4.14.12-2 (2018-01-06) x86_64.
Command: "fwts aspm".
Running tests: aspm.
aspm: PCIe ASPM test.
--------------------------------------------------------------------------------
Test 1 of 2: PCIe ASPM ACPI test.
SKIPPED: Test 1, No valid FACP information present: cannot test ASPM.
Test 2 of 2: PCIe ASPM registers test.
PASSED: Test 2, PCIe ASPM setting matched was matched.
WARNING: Test 2, RP 0000h:00h:05h.00h L0s not enabled.
ADVICE: The ASPM L0s low power Link state is optimized for short entry and exit
latencies, while providing substantial power savings. Disabling L0s of a PCIe
device may increase power consumption, and will impact the battery life of a
mobile system.
FAILED [MEDIUM] PCIEASPM_Unmatched: Test 2, PCIe ASPM setting was not matched.
RP 0000h:00h:05h.00h has ASPM = 02h.
Device 0000h:03h:00h.00h has ASPM = 03h.
ADVICE: ASPM control registers between root port and device must match in order
for ASPM to be active. Unmatched configuration indicates software did not
configure ASPM correctly and the system is not saving power at its full
potential.
WARNING: Test 2, RP 0000h:00h:04h.00h L0s not enabled.
WARNING: Test 2, Device 0000h:02h:00h.00h L0s not enabled.
ADVICE: The ASPM L0s low power Link state is optimized for short entry and exit
latencies, while providing substantial power savings. Disabling L0s of a PCIe
device may increase power consumption, and will impact the battery life of a
mobile system.
PASSED: Test 2, PCIe ASPM setting matched was matched.
r8169 0000:02:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170728/tbfadt-658)
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
ATPX version 1, functions 0x00000181
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B7F (\_SB.SMB0) (20170728/utaddress-247)
[drm:radeon_pci_probe [radeon]] *ERROR* radeon kernel modesetting for R600 or later requires firmware-amd-graphics.
[ 1.920659] [drm:radeon_pci_probe [radeon]] *ERROR* radeon kernel modesetting for R600 or later requires firmware-amd-graphics.
ACPI: Invalid passive threshold
[ 1.924226] ACPI: Invalid active0 threshold
[ 1.924787] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[Firmware Bug]: battery: (dis)charge rate invalid.
wl: loading out-of-tree module taints kernel.
[ 10.047158] wl: module license 'Mixed/Proprietary' taints kernel.
[ 10.047159] Disabling lock debugging due to kernel taint
[ 10.070534] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[ 20.278341] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 20.281058] r8169 0000:02:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)
20.281063] r8169 0000:02:00.0: Direct firmware load for rtl_nic/rtl8168e-3.fw failed with error -2
[ 20.281069] r8169 0000:02:00.0 enp2s0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
WW) Falling back to old probe method for modesetting
open /dev/dri/card0: No such file or directory
open /dev/fb0: No such file or directory
[ 20.521] (EE) Screen 0 deleted because of no matching config section.
[ 20.521] (II) UnloadModule: "radeon"
[ 20.521] (EE) Screen 0 deleted because of no matching config section.
[ 20.521] (II) UnloadModule: "modesetting"
[ 20.521] (EE) Screen 0 deleted because of no matching config section.
VESA(0): Unable to estimate virtual size
VESA(0): No valid modes left. Trying less strict filter...
[ 20.705] (II) VESA(0): : Using hsync value of 47.38 kHz
[ 20.705] (II) VESA(0): : Using vrefresh value of 59.97 Hz
[ 20.705] (WW) VESA(0): Unable to estimate virtual size
AIGLX: reverting to software rendering
[ 21.435] (EE) AIGLX error: dlopen of /usr/lib/x86_64-linux-gnu/dri/swrast_dri.so failed (/usr/lib/x86_64-linux-gnu/dri/swrast_dri.so: cannot open shared object file: No such file or directory)
[ 21.435] (EE) GLX: could not load software renderer
[ 21.435] (II) GLX: no usable GL providers found for screen 0
[drm:radeon_dp_link_train [radeon]]*ERROR*clock recovery reached max voltage
[drm:radeon_dp_link_train [radeon]]*ERROR*clock recovery failed
中文 
How to fix grub boot menu that has disappeared? 
Results generated by fwts: Version V17.09.00 (2017-09-27 07:09:03).
Some of this work - Copyright (c) 1999 - 2017, Intel Corp. All rights reserved.
Some of this work - Copyright (c) 2010 - 2017, Canonical.
Some of this work - Copyright (c) 2016 - 2017, IBM.
Some of this work - Copyright (c) 2017, ARM Ltd.
This test run on 06/05/18 at 15:11:48 on host Linux ifang-PC
4.14.0-deepin2-amd64 #1 SMP PREEMPT Deepin 4.14.12-2 (2018-01-06) x86_64.
Command: "fwts aspm".
Running tests: aspm.
aspm: PCIe ASPM test.
--------------------------------------------------------------------------------
Test 1 of 2: PCIe ASPM ACPI test.
SKIPPED: Test 1, No valid FACP information present: cannot test ASPM.
Test 2 of 2: PCIe ASPM registers test.
PASSED: Test 2, PCIe ASPM setting matched was matched.
WARNING: Test 2, RP 0000h:00h:05h.00h L0s not enabled.
ADVICE: The ASPM L0s low power Link state is optimized for short entry and exit
latencies, while providing substantial power savings. Disabling L0s of a PCIe
device may increase power consumption, and will impact the battery life of a
mobile system.
FAILED [MEDIUM] PCIEASPM_Unmatched: Test 2, PCIe ASPM setting was not matched.
RP 0000h:00h:05h.00h has ASPM = 02h.
Device 0000h:03h:00h.00h has ASPM = 03h.
ADVICE: ASPM control registers between root port and device must match in order
for ASPM to be active. Unmatched configuration indicates software did not
configure ASPM correctly and the system is not saving power at its full
potential.
WARNING: Test 2, RP 0000h:00h:04h.00h L0s not enabled.
WARNING: Test 2, Device 0000h:02h:00h.00h L0s not enabled.
ADVICE: The ASPM L0s low power Link state is optimized for short entry and exit
latencies, while providing substantial power savings. Disabling L0s of a PCIe
device may increase power consumption, and will impact the battery life of a
mobile system.
PASSED: Test 2, PCIe ASPM setting matched was matched.
================================================================================
2 passed, 1 failed, 3 warnings, 0 aborted, 1 skipped, 0 info only.
================================================================================
2 passed, 1 failed, 3 warnings, 0 aborted, 1 skipped, 0 info only.
Test Failure Summary
================================================================================
Critical failures: NONE
High failures: NONE
Medium failures: 1
aspm: PCIe ASPM setting was not matched.
Low failures: NONE
Other failures: NONE
Test |Pass |Fail |Abort|Warn |Skip |Info |
---------------+-----+-----+-----+-----+-----+-----+
aspm | 2| 1| | 3| 1| |
---------------+-----+-----+-----+-----+-----+-----+
Total: | 2| 1| 0| 3| 1| 0|
---------------+-----+-----+-----+-----+-----+-----+
Results generated by fwts: Version V17.09.00 (2017-09-27 07:09:03).
r8169 0000:02:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170728/tbfadt-658)
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
ATPX version 1, functions 0x00000181
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B7F (\_SB.SMB0) (20170728/utaddress-247)
[drm:radeon_pci_probe [radeon]] *ERROR* radeon kernel modesetting for R600 or later requires firmware-amd-graphics.
[ 1.920659] [drm:radeon_pci_probe [radeon]] *ERROR* radeon kernel modesetting for R600 or later requires firmware-amd-graphics.
ACPI: Invalid passive threshold
[ 1.924226] ACPI: Invalid active0 threshold
[ 1.924787] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[Firmware Bug]: battery: (dis)charge rate invalid.
wl: loading out-of-tree module taints kernel.
[ 10.047158] wl: module license 'Mixed/Proprietary' taints kernel.
[ 10.047159] Disabling lock debugging due to kernel taint
[ 10.070534] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[ 20.278341] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 20.281058] r8169 0000:02:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)
20.281063] r8169 0000:02:00.0: Direct firmware load for rtl_nic/rtl8168e-3.fw failed with error -2
[ 20.281069] r8169 0000:02:00.0 enp2s0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
WW) Falling back to old probe method for modesetting
open /dev/dri/card0: No such file or directory
open /dev/fb0: No such file or directory
[ 20.521] (EE) Screen 0 deleted because of no matching config section.
[ 20.521] (II) UnloadModule: "radeon"
[ 20.521] (EE) Screen 0 deleted because of no matching config section.
[ 20.521] (II) UnloadModule: "modesetting"
[ 20.521] (EE) Screen 0 deleted because of no matching config section.
VESA(0): Unable to estimate virtual size
VESA(0): No valid modes left. Trying less strict filter...
[ 20.705] (II) VESA(0): : Using hsync value of 47.38 kHz
[ 20.705] (II) VESA(0): : Using vrefresh value of 59.97 Hz
[ 20.705] (WW) VESA(0): Unable to estimate virtual size
AIGLX: reverting to software rendering
[ 21.435] (EE) AIGLX error: dlopen of /usr/lib/x86_64-linux-gnu/dri/swrast_dri.so failed (/usr/lib/x86_64-linux-gnu/dri/swrast_dri.so: cannot open shared object file: No such file or directory)
[ 21.435] (EE) GLX: could not load software renderer
[ 21.435] (II) GLX: no usable GL providers found for screen 0
[drm:radeon_dp_link_train [radeon]]*ERROR*clock recovery reached max voltage
[drm:radeon_dp_link_train [radeon]]*ERROR*clock recovery failed