声音突然就没了
Tofloor
poster avatar
初心
deepin
2018-03-14 06:55
Author
在谷歌进腾讯视频看电视,老是在模拟耳机改到线缆输出,就没声音了

求助一下
谢谢
Reply Favorite View the author
All Replies
avatar
aida
deepin
2018-03-15 01:33
#1
其他地方的声音呢?整个系统声音都没有了?

切换到扬声器后,在终端执行pacmd list-cards 和 pacmd list-sinks命令,将输出的屏显反馈到社区。
Reply View the author
avatar
初心
deepin
2018-03-16 21:35
#2
https://bbs.deepin.org/post/154182
其他地方的声音呢?整个系统声音都没有了?

切换到扬声器后,在终端执行pacmd list-cards 和 pacmd list-s ...


都没声音了,就在模拟耳机下有声音,


deepin@deepin-PC:~$ pacmd list-cards
1 card(s) available.
    index: 0
        name:
        driver:
        owner module: 7
        properties:
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xfef40000 irq 16"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:14.2"
                sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card1"
                device.bus = "pci"
                device.vendor.id = "1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "780d"
                device.product.name = "FCH Azalia Controller"
                device.form_factor = "internal"
                device.string = "1"
                device.description = "内置音频"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        profiles:
                input:analog-stereo: 模拟立体声 输入 (priority 60, available: unknown)
                output:analog-stereo: 模拟立体声 输出 (priority 6000, available: unknown)
                output:analog-stereo+input:analog-stereo: 模拟立体声双工 (priority 6060, available: unknown)
                off: 关 (priority 0, available: unknown)
        active profile:
        sinks:
                alsa_output.pci-0000_00_14.2.analog-stereo/#0: 内置音频 模拟立体声
        sources:
                alsa_output.pci-0000_00_14.2.analog-stereo.monitor/#0: Monitor of 内置音频 模拟立体声
                alsa_input.pci-0000_00_14.2.analog-stereo/#1: 内置音频 模拟立体声
        ports:
                analog-input-front-mic: 前麦克风 (priority 8500, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-input-microphone"
                analog-input-rear-mic: 后麦克风 (priority 8200, latency offset 0 usec, available: yes)
                        properties:
                                device.icon_name = "audio-input-microphone"
                analog-input-linein: 输入插孔 (priority 8100, latency offset 0 usec, available: yes)
                        properties:
                               
                analog-output-lineout: 线缆输出 (priority 9900, latency offset 0 usec, available: unknown)
                        properties:
                               
                analog-output-headphones: 模拟耳机 (priority 9000, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "audio-headphones"
deepin@deepin-PC:~$



deepin@deepin-PC:~$ pacmd list-sinks
1 sink(s) available.
  * index: 0
        name:
        driver:
        flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 9959
        volume: front-left: 44433 /  68% / -10.13 dB,   front-right: 44433 /  68% / -10.13 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max request: 0 KiB
        max rewind: 0 KiB
        monitor source: 0
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     立体声
        used by: 0
        linked by: 0
        configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
        card: 0
        module: 7
        properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC662 rev3 Analog"
                alsa.id = "ALC662 rev3 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xfef40000 irq 16"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:14.2"
                sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card1"
                device.bus = "pci"
                device.vendor.id = "1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "780d"
                device.product.name = "FCH Azalia Controller"
                device.form_factor = "internal"
                device.string = "front:1"
                device.buffering.buffer_size = "352768"
                device.buffering.fragment_size = "176384"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "模拟立体声"
                device.description = "内置音频 模拟立体声"
                alsa.mixer_name = "Realtek ALC662 rev3"
                alsa.components = "HDA:10ec0662,10ec0662,00100300"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        ports:
                analog-output-lineout: 线缆输出 (priority 9900, latency offset 0 usec, available: unknown)
                        properties:
                               
                analog-output-headphones: 模拟耳机 (priority 9000, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "audio-headphones"
        active port:
deepin@deepin-PC:~$

是这个? 第一次发不知道对不对
Reply View the author
avatar
aida
deepin
2018-03-20 19:03
#3
Reply View the author
avatar
yanbowen
deepin
Community Developer
2018-03-22 19:10
#4
https://bbs.deepin.org/post/154182
都没声音了,就在模拟耳机下有声音,

自动改到 线缆输出 了
Reply View the author
avatar
初心
deepin
2018-03-25 04:19
#5
https://bbs.deepin.org/post/154182
自动改到 线缆输出 了

对,自动改到线缆输出了 然后就没有声音了
Reply View the author
avatar
yanbowen
deepin
Community Developer
2018-03-26 17:13
#6
https://bbs.deepin.org/post/154182
对,自动改到线缆输出了 然后就没有声音了

执行下:

  1. pulseaudio --kill;pulseaudio --start --log-level=debug --log-target=newfile:/tmp/pulse.log
Copy the Code

然后去重现你的问题,重现后把 /tmp/pulse.log 文件上传下
Reply View the author
avatar
初心
deepin
2018-03-27 05:59
#7
https://bbs.deepin.org/post/154182
执行下:

然后去重现你的问题,重现后把 /tmp/pulse.log 文件上传下

现在在线缆和耳机模式都没有声音了     
Reply View the author
avatar
初心
deepin
2018-03-27 06:10
#8
https://bbs.deepin.org/post/154182
执行下:

然后去重现你的问题,重现后把 /tmp/pulse.log 文件上传下

那个log文件怎么上传 啊        
Reply View the author
avatar
初心
deepin
2018-03-27 06:17
#9
https://bbs.deepin.org/post/154182
执行下:

然后去重现你的问题,重现后把 /tmp/pulse.log 文件上传下

用网易云在耳机模式有声音,在谷歌里面用的腾讯视频,爱奇艺,百度云音乐都没有声音,这次是在线缆和耳机模式下都没有声音了            

  等下我重启一下试试
Reply View the author
avatar
初心
deepin
2018-03-27 07:18
#10
https://bbs.deepin.org/post/154182
执行下:

然后去重现你的问题,重现后把 /tmp/pulse.log 文件上传下

重启后没重现
Reply View the author