• Home
  • Categories
  • WIKI
  • LANGUAGE: en
    • Update problems
    Community Discussion 1268 views · 6 replies ·
    Tofloor
    poster avatar
    altos109
    deepin
    2018-02-22 09:47
    Author
    Edited by altos109 at 2018-2-22 01:48

    1.Screen stays blank for couple of minutes after login
    2.Power options like reboot & shutdown dont do anything,moreover system hangs3.Hotspot doesn't give speeds

    Any help would be grateful


    Reply Favorite View the author
    All Replies
    aida
    deepin
    2018-02-23 17:51
    #1
    Please send the log to us when the issue happen.
    Here is the way to get the log:
    Execute  command in terminal
    1. sudo  deepin-feedback-cli
    Copy the Code
    Reply View the author
    taha
    deepin
    2018-02-24 04:40
    #2
    I had similar issues after updating and for me the workaround was to choose the advanced boot option and select older kernel version option. With that kernel version system worked normally again.
    Reply View the author
    nipos
    deepin
    2018-02-25 03:42
    #3
    If tahas solution work,you can go back to the working kernel version permanently by removing the new one:
    sudo apt-get remove linux-image-4.14.0-deepin2-amd64
    Reply View the author
    altos109
    deepin
    2018-02-27 08:42
    #4
    https://bbs.deepin.org/post/153431
    If tahas solution work,you can go back to the working kernel version permanently by removing the new ...

    thanks.worked like a charm
    Reply View the author
    altos109
    deepin
    2018-02-27 08:44
    #5
    https://bbs.deepin.org/post/153431
    I had similar issues after updating and for me the workaround was to choose the advanced boot option ...

    thank you for responding.I ve searched about that also.but removal of kernel automatically uses previous available.so i went for it.
    Thank you
    Reply View the author
    altos109
    deepin
    2018-02-27 08:47
    #6
    https://bbs.deepin.org/post/153431
    Please send the log to us when the issue happen.
    Here is the way to get the log:
    Execute  command in ...

    Tried to execute that command . taking too much time @
    executing sliceinfo_video.
    I removed and stayed back with previous version of kernel.
    And ran the same command again.It gave a report fast.
    "executing sliceinfo_video." what might be the problem.(For future caution)
    Reply View the author