触摸板的安装下 xinput 然后下载 链接:https://pan.baidu.com/s/1eSzgsk6 密码:hgw9  然后到文件下载的目录执行 'python3 xinput_detail.py' 最后把输出贴一下，谢谢！

好的 谢谢反馈

更新firmware,关掉蓝牙试一试

shao@shao-PC:~/Downloads$ python3 xinput_detail.py
--------------- Will list device: 12 props
Device 'Compx 2.4G Receiver':
        Device Enabled (140):        1
        Coordinate Transformation Matrix (142):        1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
        libinput Accel Speed (275):        0.333333
        libinput Accel Speed Default (276):        0.000000
        libinput Accel Profiles Available (277):        1, 1
        libinput Accel Profile Enabled (278):        1, 0
        libinput Accel Profile Enabled Default (279):        1, 0
        libinput Natural Scrolling Enabled (280):        0
        libinput Natural Scrolling Enabled Default (281):        0
        libinput Send Events Modes Available (260):        1, 0
        libinput Send Events Mode Enabled (261):        0, 0
        libinput Send Events Mode Enabled Default (262):        0, 0
        libinput Left Handed Enabled (282):        0
        libinput Left Handed Enabled Default (283):        0
        libinput Scroll Methods Available (284):        0, 0, 1
        libinput Scroll Method Enabled (285):        0, 0, 0
        libinput Scroll Method Enabled Default (286):        0, 0, 0
        libinput Button Scrolling Button (287):        2
        libinput Button Scrolling Button Default (288):        2
        libinput Middle Emulation Enabled (289):        0
        libinput Middle Emulation Enabled Default (290):        0
        Device Node (263):        "/dev/input/event8"
        Device Product ID (264):        9639, 64035
        libinput Drag Lock Buttons (291):       
        libinput Horizontal Scroll Enabled (292):        1

--------------- Will list device: 6 props
Device 'Power Button':
        Device Enabled (140):        1
        Coordinate Transformation Matrix (142):        1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
        libinput Send Events Modes Available (260):        1, 0
        libinput Send Events Mode Enabled (261):        0, 0
        libinput Send Events Mode Enabled Default (262):        0, 0
        Device Node (263):        "/dev/input/event3"
        Device Product ID (264):        0, 1

--------------- Will list device: 7 props
Device 'Video Bus':
        Device Enabled (140):        1
        Coordinate Transformation Matrix (142):        1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
        libinput Send Events Modes Available (260):        1, 0
        libinput Send Events Mode Enabled (261):        0, 0
        libinput Send Events Mode Enabled Default (262):        0, 0
        Device Node (263):        "/dev/input/event5"
        Device Product ID (264):        0, 6

--------------- Will list device: 8 props
Device 'Video Bus':
        Device Enabled (140):        1
        Coordinate Transformation Matrix (142):        1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
        libinput Send Events Modes Available (260):        1, 0
        libinput Send Events Mode Enabled (261):        0, 0
        libinput Send Events Mode Enabled Default (262):        0, 0
        Device Node (263):        "/dev/input/event6"
        Device Product ID (264):        0, 6

--------------- Will list device: 9 props
Device 'Power Button':
        Device Enabled (140):        1
        Coordinate Transformation Matrix (142):        1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
        libinput Send Events Modes Available (260):        1, 0
        libinput Send Events Mode Enabled (261):        0, 0
        libinput Send Events Mode Enabled Default (262):        0, 0
        Device Node (263):        "/dev/input/event2"
        Device Product ID (264):        0, 1

--------------- Will list device: 10 props
Device 'Sleep Button':
        Device Enabled (140):        1
        Coordinate Transformation Matrix (142):        1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
        libinput Send Events Modes Available (260):        1, 0
        libinput Send Events Mode Enabled (261):        0, 0
        libinput Send Events Mode Enabled Default (262):        0, 0
        Device Node (263):        "/dev/input/event0"
        Device Product ID (264):        0, 3

--------------- Will list device: 11 props
Device 'Compx 2.4G Receiver':
        Device Enabled (140):        1
        Coordinate Transformation Matrix (142):        1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
        libinput Send Events Modes Available (260):        1, 0
        libinput Send Events Mode Enabled (261):        0, 0
        libinput Send Events Mode Enabled Default (262):        0, 0
        Device Node (263):        "/dev/input/event7"
        Device Product ID (264):        9639, 64035

--------------- Will list device: 13 props
Device 'USB HD Webcam':
        Device Enabled (140):        1
        Coordinate Transformation Matrix (142):        1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
        libinput Send Events Modes Available (260):        1, 0
        libinput Send Events Mode Enabled (261):        0, 0
        libinput Send Events Mode Enabled Default (262):        0, 0
        Device Node (263):        "/dev/input/event15"
        Device Product ID (264):        1266, 46137

--------------- Will list device: 14 props
Device 'AT Translated Set 2 keyboard':
        Device Enabled (140):        1
        Coordinate Transformation Matrix (142):        1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
        libinput Send Events Modes Available (260):        1, 0
        libinput Send Events Mode Enabled (261):        0, 0
        libinput Send Events Mode Enabled Default (262):        0, 0
        Device Node (263):        "/dev/input/event4"
        Device Product ID (264):        1, 1

--------------- Will list device: 15 props
Device 'Compx 2.4G Receiver':
        Device Enabled (140):        1
        Coordinate Transformation Matrix (142):        1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
        libinput Accel Speed (275):        0.333333
        libinput Accel Speed Default (276):        0.000000
        libinput Accel Profiles Available (277):        1, 1
        libinput Accel Profile Enabled (278):        1, 0
        libinput Accel Profile Enabled Default (279):        1, 0
        libinput Natural Scrolling Enabled (280):        0
        libinput Natural Scrolling Enabled Default (281):        0
        libinput Send Events Modes Available (260):        1, 0
        libinput Send Events Mode Enabled (261):        0, 0
        libinput Send Events Mode Enabled Default (262):        0, 0
        libinput Left Handed Enabled (282):        0
        libinput Left Handed Enabled Default (283):        0
        libinput Scroll Methods Available (284):        0, 0, 1
        libinput Scroll Method Enabled (285):        0, 0, 0
        libinput Scroll Method Enabled Default (286):        0, 0, 0
        libinput Button Scrolling Button (287):        2
        libinput Button Scrolling Button Default (288):        2
        libinput Middle Emulation Enabled (289):        0
        libinput Middle Emulation Enabled Default (290):        0
        Device Node (263):        "/dev/input/event8"
        Device Product ID (264):        9639, 64035

没有发现触摸板设备......

难道是驱动问题？

dalao，还记得我的小新Air12吗？触摸板至今还是识别成鼠标看看这些信息能不能解决些问题？

你是不是也和我一样是elan的触摸板？

检查下有没有相关的硬件开关, 或者进入系统后按下键盘上的触摸板相关的组合键.

安装下 xserver-xorg-input-synaptics 然后重启试试

显示已经安装了啊

好吧，那就是识别错误，有没有试过改 x conf 文件，指定你的设备使用 synaptics 驱动？

本帖最后由 linyk 于 2017-10-23 19:07 编辑
（记错了，分不清yanbowen和yangbo。。。）试过，不行，没辙了。之前15.4版本@yangbo 帮忙改过内核，后来的确可以识别称ETPS/2，但是触摸板没反应了，所以后来又把内核改过来了。https://bbs.deepin.org/post/139979

大佬，帮忙看看无线掉线的问题啊

本帖最后由 yangbo 于 2017-10-24 15:44 编辑

elantech firmware版本是0x5e1f00还是什么来着那款触摸板只有鼠标的功能.

包长3个字节是有意义的包，包长4个或者6个字节完全没有意义，会不停的reset

可以试一试yanbowen的办法，改改config用synaptics看看。不过我都忘了这是个什么设备了,usb?i2c?i8042?

谢谢，触摸板已经解决