• Home
  • Categories
  • WIKI
  • LANGUAGE: en
    • 如何新建一条移动宽带的连接呢？
    Experiences and Insight 2099 views · 14 replies ·
    Tofloor
    poster avatar
    ouchyoung
    deepin
    2017-09-14 17:22
    Author
    我有一个ZTE 832S的移动宽带数据卡，插上deepin最新版后，能识别到网络设备，然后不停地去获取IP地址，过一会就会报什么SIM卡错误或欠费。但实际上在windows下是可以正常使用的。在ubuntu下看到有一个新建移动宽带的选项，但是deepin中找不到。不知道在deepin下面该如何设置这个设备呢？
    Reply Favorite View the author
    All Replies
    avatar
    jingle
    deepin
    2017-09-14 17:39
    #1
    控制中心 》 网络 》 DSL  开启创建一个
    Reply View the author
    avatar
    ouchyoung
    deepin
    2017-09-14 18:36
    #2
    本帖最后由 ouchyoung 于 2017-9-14 10:43 编辑
    https://bbs.deepin.org/post/145499
    控制中心 》 网络 》 DSL  开启创建一个

    可能是我没说清楚……这个卡接入的方式是cmnet。这一模式接入需要拨一个号码，然后没有用户名和密码，但是有APN设置啊。DSL进去以后，只有一个创建pppoe的选项可用，这个不对头啊~~因为没有ethernet的环境。不过我还是试了一下，结果打开一看，果然要填用户名和密码，但是没有拨号号码填写的地方。不成功。
    下图就是win下的连接方式

    Reply View the author
    avatar
    yanbowen
    deepin
    Community Developer
    2017-09-14 19:06
    #3
    https://bbs.deepin.org/post/145499
    可能是我没说清楚……这个卡接入的方式是cmnet。这一模式接入需要拨一个号码，然后没有用户名和密码，但是 ...

    新版的控制中心去掉了这方面的配置，安装下 'network-manager-gnome' 来创建吧
    Reply View the author
    avatar
    ouchyoung
    deepin
    2017-09-15 00:39
    #4
    https://bbs.deepin.org/post/145499
    新版的控制中心去掉了这方面的配置，安装下 'network-manager-gnome' 来创建吧

    装上了，能看见系统自己建立了一条移动宽带连接，拨的号码不对，但是更改后，依然连接不上，5555了
    Reply View the author
    avatar
    yanbowen
    deepin
    Community Developer
    2017-09-15 17:35
    #5
    贴一下 'dpkg -l|grep ppp' 的输出，谢谢
    Reply View the author
    avatar
    ouchyoung
    deepin
    2017-09-15 17:55
    #6
    https://bbs.deepin.org/post/145499
    贴一下 'dpkg -l|grep ppp' 的输出，谢谢


    有这三个组件
    Reply View the author
    avatar
    yanbowen
    deepin
    Community Developer
    2017-09-15 18:02
    #7
    执行下 'sudo journactl -u NetworkManager -f' 然后再去连接一次，把输出贴一下. 输出可能会很多
    Reply View the author
    avatar
    ouchyoung
    deepin
    2017-09-15 18:33
    #8
    https://bbs.deepin.org/post/145499
    执行下 'sudo journactl -u NetworkManager -f' 然后再去连接一次，把输出贴一下. 输出可能会很多 ...

    好像是网卡没能驱动起来：

    9月 15 10:30:56 ouch-linux dhclient[1912]: DHCPDISCOVER on enx00a0c6000000 to 255.255.255.255 port 67 interval 20
    9月 15 10:31:16 ouch-linux dhclient[1912]: DHCPDISCOVER on enx00a0c6000000 to 255.255.255.255 port 67 interval 19
    9月 15 10:31:21 ouch-linux NetworkManager[539]:   [1505442681.4692] dhcp4 (enx00a0c6000000): request timed out
    9月 15 10:31:21 ouch-linux NetworkManager[539]:   [1505442681.4692] dhcp4 (enx00a0c6000000): state changed unknown -> timeout
    9月 15 10:31:21 ouch-linux NetworkManager[539]:   [1505442681.5015] dhcp4 (enx00a0c6000000): canceled DHCP transaction, DHCP client pid 1912
    9月 15 10:31:21 ouch-linux NetworkManager[539]:   [1505442681.5015] dhcp4 (enx00a0c6000000): state changed timeout -> done
    9月 15 10:31:21 ouch-linux NetworkManager[539]:   [1505442681.5019] device (enx00a0c6000000): state change: ip-config -> failed (reason 'ip-config-unavailable', internal state 'managed')
    9月 15 10:31:21 ouch-linux NetworkManager[539]:   [1505442681.5023] policy: disabling autoconnect for connection 'ZTE WCDMA Technologies MSM'.
    9月 15 10:31:21 ouch-linux NetworkManager[539]:   [1505442681.5025] device (enx00a0c6000000): Activation: failed for connection 'ZTE WCDMA Technologies MSM'
    9月 15 10:31:21 ouch-linux NetworkManager[539]:   [1505442681.5033] device (enx00a0c6000000): state change: failed -> disconnected (reason 'none', internal state 'managed')
    9月 15 10:31:34 ouch-linux NetworkManager[539]:   [1505442694.5150] device (ttyUSB0): Activation: starting connection 'China Mobile connection 1' (b6d25554-188e-41f4-ade0-056a4ec13d27)
    9月 15 10:31:34 ouch-linux NetworkManager[539]:   [1505442694.5153] audit: op="connection-activate" uuid="b6d25554-188e-41f4-ade0-056a4ec13d27" name="China Mobile connection 1" pid=1163 uid=1000 result="success"
    9月 15 10:31:34 ouch-linux NetworkManager[539]:   [1505442694.5155] device (ttyUSB0): state change: disconnected -> prepare (reason 'none', internal state 'managed')
    9月 15 10:31:34 ouch-linux NetworkManager[539]:   [1505442694.5207] (ttyUSB0): modem state changed, 'registered' --> 'connecting' (reason: user-requested)
    9月 15 10:31:41 ouch-linux NetworkManager[539]:   [1505442701.0891] (ttyUSB0): modem state changed, 'connecting' --> 'registered' (reason: user-requested)
    9月 15 10:31:41 ouch-linux NetworkManager[539]:   [1505442701.0939] (ttyUSB0): modem state changed, 'registered' --> 'connecting' (reason: user-requested)
    9月 15 10:31:54 ouch-linux NetworkManager[539]:   [1505442714.2327] (ttyUSB0): modem state changed, 'connecting' --> 'registered' (reason: user-requested)
    9月 15 10:31:54 ouch-linux NetworkManager[539]:   [1505442714.2377] (ttyUSB0): modem state changed, 'registered' --> 'connecting' (reason: user-requested)
    9月 15 10:32:00 ouch-linux NetworkManager[539]:   [1505442720.8100] (ttyUSB0): modem state changed, 'connecting' --> 'registered' (reason: user-requested)
    9月 15 10:32:00 ouch-linux NetworkManager[539]:   [1505442720.8101] modem-broadband[ttyUSB0]: failed to connect modem: Sending command failed: 'Resource temporarily unavailable'
    9月 15 10:32:00 ouch-linux NetworkManager[539]:   [1505442720.8102] device (ttyUSB0): state change: prepare -> failed (reason 'unknown', internal state 'managed')
    9月 15 10:32:00 ouch-linux NetworkManager[539]:   [1505442720.8108] device (ttyUSB0): Activation: failed for connection 'China Mobile connection 1'
    9月 15 10:32:00 ouch-linux NetworkManager[539]:   [1505442720.8115] device (ttyUSB0): state change: failed -> disconnected (reason 'none', internal state 'managed')
    Reply View the author
    avatar
    yanbowen
    deepin
    Community Developer
    2017-09-15 18:58
    #9
    插上3G上网卡，然后执行 'sudo systemctl restart NetworkManager' 和 'sudo systemctl restart ModemManager'，接着安装 'sudo apt-get install modem-manager-gui'

    安装完后，在终端执行 'modem-manager-gui' 用它来配置3G上网卡试试
    Reply View the author
    avatar
    ouchyoung
    deepin
    2017-09-15 19:32
    #10
    本帖最后由 ouchyoung 于 2017-9-15 11:46 编辑
    https://bbs.deepin.org/post/145499
    插上3G上网卡，然后执行 'sudo systemctl restart NetworkManager' 和 'sudo systemctl restart ModemManag ...

    能够认出modem型号，但是无法enable。重新插拔一次后，能读取短信了。但是没有别的什么可配置的参数啊。


    强制扫描网络也会报错：

    Reply View the author
    avatar
    yanbowen
    deepin
    Community Developer
    2017-09-15 19:50
    #11
    sudo dmesg 的输出了？
    Reply View the author
    avatar
    ouchyoung
    deepin
    2017-09-15 19:56
    #12
    https://bbs.deepin.org/post/145499
    sudo dmesg 的输出了？

    [   50.240082] usb 1-1.2: USB disconnect, device number 6
    [   50.571744] usb 1-1.2: new high-speed USB device number 7 using ehci-pci
    [   50.682403] usb 1-1.2: New USB device found, idVendor=19d2, idProduct=0199
    [   50.682407] usb 1-1.2: New USB device strings: Mfr=6, Product=7, SerialNumber=8
    [   50.682409] usb 1-1.2: Product: ZTE-Modem
    [   50.682410] usb 1-1.2: Manufacturer: ZTE
    [   50.682412] usb 1-1.2: SerialNumber: ZTE-ECM
    [   50.732023] cdc_ether 1-1.2:1.0 eth0: register 'cdc_ether' at usb-0000:00:1a.0-1.2, ZTE CDC Ethernet Device, 00:a0:c6:00:00:00
    [   50.732045] usbcore: registered new interface driver cdc_ether
    [   50.741258] usbcore: registered new interface driver cdc_wdm
    [   50.754206] usbcore: registered new interface driver usbserial
    [   50.754216] usbcore: registered new interface driver usbserial_generic
    [   50.754223] usbserial: USB Serial support registered for generic
    [   50.762792] usbcore: registered new interface driver qmi_wwan
    [   50.780454] cdc_ether 1-1.2:1.0 enx00a0c6000000: renamed from eth0
    [   50.802583] usbcore: registered new interface driver option
    [   50.802593] usbserial: USB Serial support registered for GSM modem (1-port)
    [   50.802722] option 1-1.2:1.2: GSM modem (1-port) converter detected
    [   50.802787] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0
    [   50.802815] option 1-1.2:1.3: GSM modem (1-port) converter detected
    [   50.802859] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB1
    [   50.802883] option 1-1.2:1.4: GSM modem (1-port) converter detected
    [   50.802924] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB2
    [   50.812500] IPv6: ADDRCONF(NETDEV_UP): enx00a0c6000000: link is not ready
    [   50.812734] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [   50.818283] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [   78.492584] PPP generic driver version 2.4.2
    [   86.287518] wlxf0b4293eb7c0: deauthenticating from 34:80:b3:ab:72:f9 by local choice (Reason: 3=DEAUTH_LEAVING)
    [   89.069397] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [   89.069419] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [   89.069422] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [   89.069475] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [   89.072333] IPv6: ADDRCONF(NETDEV_UP): wlxf0b4293eb7c0: link is not ready
    [   89.101587] IPv6: ADDRCONF(NETDEV_UP): wlxf0b4293eb7c0: link is not ready
    [   89.135872] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [   89.135899] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [   89.220041] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [   89.220079] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [   89.220309] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [   89.226864] IPv6: ADDRCONF(NETDEV_UP): wlxf0b4293eb7c0: link is not ready
    [   91.471193] wlxf0b4293eb7c0: authenticate with 34:80:b3:ab:72:f9
    [   91.505294] wlxf0b4293eb7c0: send auth to 34:80:b3:ab:72:f9 (try 1/3)
    [   91.508056] wlxf0b4293eb7c0: authenticated
    [   91.510675] wlxf0b4293eb7c0: associate with 34:80:b3:ab:72:f9 (try 1/3)
    [   91.527574] wlxf0b4293eb7c0: RX AssocResp from 34:80:b3:ab:72:f9 (capab=0x8431 status=0 aid=3)
    [   91.561935] wlxf0b4293eb7c0: associated
    [   91.561993] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf0b4293eb7c0: link becomes ready
    [  134.063712] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [  134.063752] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [  134.063759] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [  134.074155] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [  134.074224] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [  134.074417] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [  179.086994] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [  179.087035] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [  179.087042] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [  179.097931] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [  179.097953] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [  179.098094] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [  224.094715] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [  224.094752] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [  224.094758] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [  224.103162] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [  224.103260] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [  269.081846] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    [  269.083457] cdc_ether 1-1.2:1.0 enx00a0c6000000: kevent 12 may have been dropped
    Reply View the author
    avatar
    yanbowen
    deepin
    Community Developer
    2017-09-15 21:12
    #13
    , 没发现什么错误，只是一直连不上....

    把建的连接删掉，然后插着3G上网卡重启，然后新建连接试试
    Reply View the author
    avatar
    yanbowen
    deepin
    Community Developer
    2017-09-15 21:14
    #14
    还是不行的话，就参考下：https://wiki.archlinux.org/index.php/ZTE_MF_823_(Megafon_M100-3)_4G_Modem
    Reply View the author