我安装了deepin15.4.1系统
Tofloor
poster avatar
玉箫
deepin
2017-08-07 18:24
Author
开机进入桌面是花屏:
打开截图软件截图是花屏:如何处理好那个花屏现象
Reply Favorite View the author
All Replies
avatar
liuguangjingshang
deepin
2017-08-07 18:30
#1
显卡驱动装好了吗?
Reply View the author
avatar
jingle
deepin
2017-08-07 18:31
#2
什么显卡,sudo deepin-feedback-cli上传下生成的日志包上来

切换到2d 后回来试试
Reply View the author
avatar
liuguangjingshang
deepin
2017-08-07 18:33
#3
Reply View the author
avatar
玉箫
deepin
2017-08-07 18:55
#4
本帖最后由 gfubing 于 2017-8-7 11:29 编辑

切换到2d 后开机重启是黒屏
Reply View the author
avatar
187******46
deepin
2017-08-08 00:03
#5
本帖最后由 caicai 于 2017-8-7 16:05 编辑

将附件解压开来,然后讲nouveau目录拷贝放到/lib/firmware/目录下,重启一次生效。 看你的显卡驱动报错日志,缺少显卡的私有固件。错误具体信息如下nouveau 0000:01:00.0: firmware: failed to load nouveau/nva8_fuc084 (-2)
[   73.196298] nouveau 0000:01:00.0: Direct firmware load for nouveau/nva8_fuc084 failed with error -2
[   73.196314] nouveau 0000:01:00.0: firmware: failed to load nouveau/nva8_fuc084d (-2)
[   73.196317] nouveau 0000:01:00.0: Direct firmware load for nouveau/nva8_fuc084d failed with error -2
[   73.196319] nouveau 0000:01:00.0: msvld: unable to load firmware data
[   73.196322] nouveau 0000:01:00.0: msvld: init failed, -19

还不行的话你就尝试一下闭源驱动吧,不过N卡的闭源驱动存在太多不确定啦。

Reply View the author
avatar
187******46
deepin
2017-08-08 00:09
#6
https://bbs.deepin.org/post/143828
切换到2d 后开机重启是黒屏

另外,在/etc/X11/xorg.conf.d/20-nouveau.conf ,自己创建此文件里增加如下内容
Section "Device"
Identifier "NV"
Driver "nouveau"
Option "ageFlip" "False"
EndSection
关闭掉pageflip的功能,你的显卡比较古老,估计不支持pageflip这种高级操作。
Reply View the author