【求助】15.4触摸板无法使用,安装了xserver-xorg-input-synaptics...
Tofloor
poster avatar
十万火急
deepin
2017-05-21 18:00
Author
本帖最后由 jacochan 于 2017-5-21 11:33 编辑

root@debug:/home/debug/Downloads# apt-get install xserver-xorg-input-synaptics
正在读取软件包列表... 完成
正在分析软件包的依赖关系树      
正在读取状态信息... 完成      
xserver-xorg-input-synaptics 已经是最新版 (1.9.0-1+b1)。
升级了 0 个软件包,新安装了 0 个软件包,要卸载 0 个软件包,有 0 个软件包未被升级。
root@debug:/home/debug/Downloads# ls
xinput_detail.py
root@debug:/home/debug/Downloads# python3  xinput_detail.py
--------------- Will list device: 11 props
Device 'USB Optical Mouse':
    Device Enabled (143):    1
    Coordinate Transformation Matrix (145):    1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
    libinput Accel Speed (278):    0.333333
    libinput Accel Speed Default (279):    0.000000
    libinput Accel Profiles Available (280):    1, 1
    libinput Accel Profile Enabled (281):    1, 0
    libinput Accel Profile Enabled Default (282):    1, 0
    libinput Natural Scrolling Enabled (283):    0
    libinput Natural Scrolling Enabled Default (284):    0
    libinput Send Events Modes Available (263):    1, 0
    libinput Send Events Mode Enabled (264):    0, 0
    libinput Send Events Mode Enabled Default (265):    0, 0
    libinput Left Handed Enabled (285):    0
    libinput Left Handed Enabled Default (286):    0
    libinput Scroll Methods Available (287):    0, 0, 1
    libinput Scroll Method Enabled (288):    0, 0, 0
    libinput Scroll Method Enabled Default (289):    0, 0, 0
    libinput Button Scrolling Button (290):    2
    libinput Button Scrolling Button Default (291):    2
    libinput Middle Emulation Enabled (292):    0
    libinput Middle Emulation Enabled Default (293):    0
    Device Node (266):    "/dev/input/event6"
    Device Product ID (267):    6447, 2326
    libinput Drag Lock Buttons (294):   
    libinput Horizontal Scroll Enabled (295):    1

--------------- Will list device: 6 props
Device 'Power Button':
    Device Enabled (143):    1
    Coordinate Transformation Matrix (145):    1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
    libinput Send Events Modes Available (263):    1, 0
    libinput Send Events Mode Enabled (264):    0, 0
    libinput Send Events Mode Enabled Default (265):    0, 0
    Device Node (266):    "/dev/input/event3"
    Device Product ID (267):    0, 1

--------------- Will list device: 7 props
Device 'Video Bus':
    Device Enabled (143):    1
    Coordinate Transformation Matrix (145):    1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
    libinput Send Events Modes Available (263):    1, 0
    libinput Send Events Mode Enabled (264):    0, 0
    libinput Send Events Mode Enabled Default (265):    0, 0
    Device Node (266):    "/dev/input/event5"
    Device Product ID (267):    0, 6

--------------- Will list device: 8 props
Device 'Video Bus':
    Device Enabled (143):    1
    Coordinate Transformation Matrix (145):    1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
    libinput Send Events Modes Available (263):    1, 0
    libinput Send Events Mode Enabled (264):    0, 0
    libinput Send Events Mode Enabled Default (265):    0, 0
    Device Node (266):    "/dev/input/event4"
    Device Product ID (267):    0, 6

--------------- Will list device: 9 props
Device 'Sleep Button':
    Device Enabled (143):    1
    Coordinate Transformation Matrix (145):    1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
    libinput Send Events Modes Available (263):    1, 0
    libinput Send Events Mode Enabled (264):    0, 0
    libinput Send Events Mode Enabled Default (265):    0, 0
    Device Node (266):    "/dev/input/event2"
    Device Product ID (267):    0, 3

--------------- Will list device: 10 props
Device 'USB2.0 HD UVC WebCam':
    Device Enabled (143):    1
    Coordinate Transformation Matrix (145):    1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
    libinput Send Events Modes Available (263):    1, 0
    libinput Send Events Mode Enabled (264):    0, 0
    libinput Send Events Mode Enabled Default (265):    0, 0
    Device Node (266):    "/dev/input/event13"
    Device Product ID (267):    1266, 45987

--------------- Will list device: 12 props
Device 'AT Translated Set 2 keyboard':
    Device Enabled (143):    1
    Coordinate Transformation Matrix (145):    1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
    libinput Send Events Modes Available (263):    1, 0
    libinput Send Events Mode Enabled (264):    0, 0
    libinput Send Events Mode Enabled Default (265):    0, 0
    Device Node (266):    "/dev/input/event0"
    Device Product ID (267):    1, 1

Reply Favorite View the author
All Replies
avatar
jingle
deepin
2017-06-19 18:46
#1
Reply View the author
avatar
yanbowen
deepin
Community Developer
2017-06-19 19:14
#2
输出上没有触摸板设备
Reply View the author
avatar
十万火急
deepin
2017-11-14 03:22
#3
https://bbs.deepin.org/post/139762
输出上没有触摸板设备

那要怎么解决?
Reply View the author
avatar
yanbowen
deepin
Community Developer
2017-11-14 05:10
#4

上传下日志吧
Reply View the author
avatar
十万火急
deepin
2017-11-25 03:42
#5

deepin-feedback-cli-Deepin-15.5 Beta-all-20171124-194048.tar.gz

抱歉才看到,日志上传了,感谢!

Reply View the author
avatar
yanbowen
deepin
Community Developer
2017-11-27 17:30
#6
https://bbs.deepin.org/post/139762
抱歉才看到,日志上传了,感谢!

https://bbs.deepin.org/user/32991 麻烦看下
Reply View the author
avatar
yangbo
deepin
2017-11-27 18:23
#7
没看到有触摸屏设备呀
是不是bios里面禁用了?
Reply View the author
avatar
十万火急
deepin
2017-12-04 16:36
#8
https://bbs.deepin.org/post/139762
没看到有触摸屏设备呀
是不是bios里面禁用了?

bios里没有找到触屏版禁用选项(或网上说的intenal pointing device选项)。windows下是正常使用的。笔记本安装的是双系统。请问下一步要如何诊断?谢谢
Reply View the author
avatar
yanbowen
deepin
Community Developer
2017-12-04 17:29
#9
https://bbs.deepin.org/post/139762
bios里没有找到触屏版禁用选项(或网上说的intenal pointing device选项)。windows下是正常使用的。笔记 ...

@yangbo 看到这个笔记本在window下的驱动是          Synaptics SMBus Driver. 这个不是特殊接口吧?
Reply View the author
avatar
yangbo
deepin
2017-12-05 01:06
#10
echo "options i2c_i801 dyndbg=+plfmt" > /etc/modprobe.d/i2c-debug.conf
echo "options i2c_smbus dyndbg=+plfmt" >> /etc/modprobe.d/i2c-debug.conf
update-initramfs -u

启动参数加上dyndbg="file drivers/i2c/* +plfmt"
重启后把feedback给来看看

i2c的接口也不是什么特殊接口
Reply View the author
avatar
yangbo
deepin
2017-12-05 01:28
#11
也可以modprobe synaptics_i2c试试看
Reply View the author
avatar
十万火急
deepin
2017-12-07 02:56
#12
https://bbs.deepin.org/post/139762
也可以modprobe synaptics_i2c试试看

也可以modprobe synaptics_i2c试试看 没反应。然后dyndbg="file drivers/i2c/* +plfmt" 怎么加到启动参数里?
Reply View the author
avatar
h20
deepin
2017-12-07 03:20
#13
借楼问一下我的系统装好后还没有用系统自带的驱动管理来更新驱动,现在使用的是开源的N卡驱动,我要使用深度的显显卡管家的前提条件是把独显和核显 的驱动都按装完毕后显卡管家才能用?对吗?
Reply View the author
avatar
h20
deepin
2017-12-07 03:21
#14
https://bbs.deepin.org/post/139762
借楼问一下我的系统装好后还没有用系统自带的驱动管理来更新驱动,现在使用的是开源的N卡驱动,我要使用深 ...

我试验了下提示更改失败
Reply View the author