canon lbp2900 打印机如何安装
Tofloor
poster avatar
vivvonylf
deepin
2017-05-06 16:01
Author
如题,系统是deepin 15.4,如何安装canon lbp 2900 打印机驱动?
谢谢各位大侠!
Reply Favorite View the author
All Replies
avatar
jingle
deepin
2017-05-06 16:54
#1
貌似列表中还未发现。(试试3系列的可以用不)
Reply View the author
avatar
jingle
deepin
2017-05-06 16:58
#2
Reply View the author
avatar
vivvonylf
deepin
2017-05-07 13:52
#3
https://bbs.deepin.org/post/139016
http://support-cn.canon-asia.com/contents/CN/ZH/0100459603.html

这个驱动能安装,但是打印机还是没有反应。
Reply View the author
avatar
南浦月
deepin
2017-05-19 22:08
#4
本帖最后由 nanpuyue 于 2017-5-19 14:18 编辑

http://gdlp01.c-wss.com/gds/6/01 ... r_V270_uk_EN.tar.gz

官方文档见压缩包内Doc目录,用浏览器打开Doc目录下的index.html
首先用tar 命令解压压缩包到本目录:
  1. tar xf Linux_CAPT_PrinterDriver_V270_uk_EN.tar.gz
Copy the Code
进入deb包所在的目录:
  1. cd Linux_CAPT_PrinterDriver_V270_uk_EN/64-bit_Driver/Debian/
Copy the Code
安装:
  1. sudo dpkg -i cndrvcups-common_3.20-1_amd.64.deb
  2. sudo dpkg -i cndrvcups-capt_2.70-1_amd64.deb
Copy the Code
如果提示缺依赖,运行如下命令:
  1. sudo apt-get -f install
Copy the Code
重启cups服务:
  1. sudo /etc/init.d/cups restart
Copy the Code
下面开始配置打印机:
使用后台打印机程序注册打印机(ppd):
  1. sudo lpadmin -p LBP2900 -m CNCUPSLBP2900CAPTK.ppd -v ccp://localhost:59687 -E
Copy the Code
使用ccpd守护程序的初始化文件来注册打印机:
  1. sudo ccpdadmin -p LBP2900 -o /dev/usb/lp0
Copy the Code
启动ccpd服务:
  1. sudo /etc/init.d/ccpd start
Copy the Code
设置cups程序开机启动
  1. sudo systemctl enable cups.service
Copy the Code

如果按照教程操作后,还是无法打印测试页,请再按照教程注册一次。
Reply View the author
avatar
atony
deepin
2017-05-19 22:58
#5
有没有出现打印机闪烁但是不打印的现象,我就是这样
Reply View the author
avatar
chenboye
deepin
2018-05-06 05:44
#6
64位的深度是不是安装不好2900驱动
按照上面做了,就是不打印。
打印提示
ccp send_data error, exit
Reply View the author
avatar
xinghuating
deepin
2018-05-12 00:14
#7
我也是这样,ccp send_data error, exit
还有别的办法吗?
Reply View the author