双显示器,超出工作频率范围(已解决)
Tofloor
poster avatar
打击越
deepin
2017-03-20 18:00
Author
本帖最后由 imever 于 2017-3-21 09:47 编辑

我的是笔记,本外接了一个显示器,15.3是正常的,更新到15.4后,外接显示器不工作了,显示 模拟信号超出工作频率范围,67.5khz/60hz
新版的显示器设置,不知道怎么调整外接显示器的分辨率,看样子好像只能设置笔记本的分辨率。





Reply Favorite View the author
All Replies
avatar
chotow
deepin
2017-03-20 19:50
#1
你起码还能识别到 我的本本直接识别不了
Reply View the author
avatar
markson
deepin
2017-03-20 20:19
#2
感觉Deepin的新双显示器设置很混乱
Reply View the author
avatar
emofode
deepin
2017-03-20 21:41
#3
贴一下执行 xrandr 的输出
Reply View the author
avatar
打击越
deepin
2017-03-20 21:43
#4
https://bbs.deepin.org/post/136329
贴一下执行 xrandr 的输出
  1. rhett@rhett-pc:~$ xrandr
  2. Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767
  3. eDP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 340mm x 190mm
  4.    1920x1080     60.00*+
  5.    1680x1050     59.88  
  6.    1600x1024     60.17  
  7.    1400x1050     59.98  
  8.    1600x900      60.00  
  9.    1280x1024     60.02  
  10.    1440x900      59.89  
  11.    1280x960      60.00  
  12.    1368x768      60.00  
  13.    1360x768      59.80    59.96  
  14.    1152x864      60.00  
  15.    1280x720      60.00  
  16.    1024x768      60.00  
  17.    1024x576      60.00  
  18.    960x540       60.00  
  19.    800x600       60.32    56.25  
  20.    864x486       60.00  
  21.    640x480       59.94  
  22.    720x405       60.00  
  23.    640x360       60.00  
  24. HDMI1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 490mm x 320mm
  25.    1680x1050     59.88 +  59.95  
  26.    1920x1080     60.00*   59.94  
  27.    1280x1024     75.02    60.02  
  28.    1440x900      74.98    59.90  
  29.    1280x960      60.00  
  30.    1152x864      75.00  
  31.    1280x720      60.00    59.94  
  32.    1024x768      75.03    60.00  
  33.    832x624       74.55  
  34.    800x600       75.00    60.32    56.25  
  35.    720x480       60.00    59.94  
  36.    640x480       75.00    60.00    59.94  
  37.    720x400       70.08  
  38. VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Copy the Code
Reply View the author
avatar
emofode
deepin
2017-03-21 05:38
#5

外接显示器应该是 HDMI1 吧,执行 xrandr --output HDMI1 --right-of eDP1 --auto 这样可以解决你的问题。
应该是设置的模式超出了显示器可显示范围。
Reply View the author
avatar
打击越
deepin
2017-03-21 17:47
#6
https://bbs.deepin.org/post/136329
外接显示器应该是 HDMI1 吧,执行 xrandr --output HDMI1 --right-of eDP1 --auto 这样可以解决你的问题 ...

搞定了,谢谢哈
Reply View the author
avatar
Luofeiyue
deepin
2017-06-03 09:56
#7
主显示器分辨率超屏 怎么弄
Reply View the author