系统报错信息,不知道如何解决
Tofloor
poster avatar
marsruc
deepin
2017-03-12 06:53
Author
dmesg --level=err
[    2.898847] nouveau 0000:02:00.0: bus: MMIO write of 0000807f FAULT at 100c18
[    2.981909] nouveau 0000:02:00.0: bus: MMIO write of 0000807e FAULT at 100c1c
[    7.499441] bbswitch: No suitable _DSM call found.
[    7.529462] systemd[1]: Failed to start Load Kernel Modules.
[    8.487032] bbswitch: No suitable _DSM call found.
[   10.297653] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[   11.864202] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   11.873808] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[   19.032707] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[   19.032713] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   27.049849] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 4765.124109] brcmsmac bcma0:1: START: tid 2 is not agg'able
[ 4765.208080] brcmsmac bcma0:1: START: tid 2 is not agg'able
[ 4765.232064] brcmsmac bcma0:1: START: tid 2 is not agg'able
[ 4981.040090] brcmsmac bcma0:1: START: tid 2 is not agg'able
[ 4981.056069] brcmsmac bcma0:1: START: tid 2 is not agg'able
[ 4981.240085] brcmsmac bcma0:1: START: tid 2 is not agg'able
[ 4981.268093] brcmsmac bcma0:1: START: tid 2 is not agg'able
[ 5654.948145] brcmsmac bcma0:1: START: tid 2 is not agg'able
[ 5654.964084] brcmsmac bcma0:1: START: tid 2 is not agg'able
[ 5655.140084] brcmsmac bcma0:1: START: tid 2 is not agg'able
[ 5655.152077] brcmsmac bcma0:1: START: tid 2 is not agg'able
[ 5658.916191] brcmsmac bcma0:1: START: tid 2 is not agg'able
[ 5658.932259] brcmsmac bcma0:1: START: tid 2 is not agg'able


Reply Favorite View the author
All Replies
avatar
marsruc
deepin
2017-03-12 07:06
#1
驱动问题解决之后剩下:
dmesg --level=err
[    2.919259] nouveau 0000:02:00.0: bus: MMIO write of 0000807f FAULT at 100c18
[    3.002315] nouveau 0000:02:00.0: bus: MMIO write of 0000807e FAULT at 100c1c
[    7.537077] bbswitch: No suitable _DSM call found.
[    7.570013] systemd[1]: Failed to start Load Kernel Modules.
[    8.568461] bbswitch: No suitable _DSM call found.
Reply View the author
avatar
marsruc
deepin
2017-03-12 07:13
#2
#systemctl status systemd-modules-load
● systemd-modules-load.service - Load Kernel Modules
   Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static; vendor preset: enabled)
   Active: failed (Result: exit-code) since 六 2017-03-11 15:05:59 CST; 8h ago
     Docs: man:systemd-modules-load.service(8)
           man:modules-load.d(5)
Main PID: 1149 (code=exited, status=1/FAILURE)

Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
Reply View the author
avatar
marsruc
deepin
2017-03-12 07:15
#3
#sudo SYSTEMD_LOG_LEVEL=debug /lib/systemd/systemd-modules-load
[sudo] mars 的密码:
Found container virtualization none
apply: /etc/modules-load.d/cups-filters.conf
load: lp
Module 'lp' is already loaded
load: ppdev
Module 'ppdev' is already loaded
load: parport_pc
Module 'parport_pc' is already loaded
apply: /etc/modules-load.d/modules.conf
load: bbswitch
Failed to insert 'bbswitch': No such device
Reply View the author
avatar
marsruc
deepin
2017-03-12 07:16
#4
看来是bbswitch的问题
Reply View the author
avatar
marsruc
deepin
2017-03-12 07:19
#5
可能是之前装了bumblebee的问题
Reply View the author