Birdofwander
deepin
2017-01-17 16:11 I get the answer on the atlas home page
If throttling is enabled, the only way to get a decent ATLAS install is therefore to turn it off. Most machines can switch it off in the BIOS, but on machines with newer Linux kernels even this does not stop pstate throttling. To tell linux not to ignore your bios settings you must log in as root/sudo, and issue something similar to:
1.Edit /etc/default/grub
2.Find line with: GRUB_CMDLINE_LINUX_DEFAULT
3.Append the following to args: intel_pstate=disable
4.Update grub: update-grub
5.Reboot
For modern Linuxes, you can turn off throttling using cpufreq-set. Some systems allow you to set the speed of individual cores, and others force groups of cores to run at same speed. Therefore, on a 4-core system, your frequency settings may not take hold until you've set all 4-cores to the desired setting. For instance:
/usr/bin/cpufreq-set -g performance -c 0
/usr/bin/cpufreq-set -g performance -c 1
/usr/bin/cpufreq-set -g performance -c 2
/usr/bin/cpufreq-set -g performance -c 3
If throttling is enabled, the only way to get a decent ATLAS install is therefore to turn it off. Most machines can switch it off in the BIOS, but on machines with newer Linux kernels even this does not stop pstate throttling. To tell linux not to ignore your bios settings you must log in as root/sudo, and issue something similar to:
1.Edit /etc/default/grub
2.Find line with: GRUB_CMDLINE_LINUX_DEFAULT
3.Append the following to args: intel_pstate=disable
4.Update grub: update-grub
5.Reboot
For modern Linuxes, you can turn off throttling using cpufreq-set. Some systems allow you to set the speed of individual cores, and others force groups of cores to run at same speed. Therefore, on a 4-core system, your frequency settings may not take hold until you've set all 4-cores to the desired setting. For instance:
/usr/bin/cpufreq-set -g performance -c 0
/usr/bin/cpufreq-set -g performance -c 1
/usr/bin/cpufreq-set -g performance -c 2
/usr/bin/cpufreq-set -g performance -c 3
Reply Like 0 View the author


中文 


If you you do not care at all about performance, you can rerun configure
with --cripple-atlas-performance to proceed in the face of throttling.
Do not do this unless you really don't care about performance.
If you are able to turn off throttling, rerun configure as normal
once you have done so.
Aborting due to throttling