【请教】Deepin Linux 系统 硬盘发出"滋滋滋滋“声
Tofloor
poster avatar
xianmin
deepin
2016-12-04 23:47
Author
本帖最后由 xianmin 于 2016-12-4 17:23 编辑

硬盘上装了三个系统: Win7, Deepin, Kali

经试验,在 Win7 和 Kali Linux 下没这个问题。但在 Deepin Linux 下会发出一种奇怪的“滋滋滋滋”的声音,差不多隔两秒“滋滋滋滋”。不确定是什么声音,不知道是不是磁头接触到盘面的声音?

我找到了这个链接: Ubuntu中的Load/Unload Cycle Count问题及解决方案 · LinuxTOY   https://linuxtoy.org/archives/ubuntu-harddisk.html

但是看不明白,也怕折腾坏了,特来请教一下!
不清楚论坛上有没有人遇到类似的问题?


sudo smartctl -a /dev/sda 的结果:
  1. smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.4.0-3-deepin-amd64] (local build)
  2. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

  3. === START OF INFORMATION SECTION ===
  4. Model Family:     Hitachi/HGST Travelstar Z7K500
  5. Device Model:     HGST HTS725050A7E630
  6. Serial Number:    RC250A1T0U929T
  7. LU WWN Device Id: 5 000cca 8b9cb7f57
  8. Firmware Version: GS2OA3E0
  9. User Capacity:    500,107,862,016 bytes [500 GB]
  10. Sector Sizes:     512 bytes logical, 4096 bytes physical
  11. Rotation Rate:    7200 rpm
  12. Form Factor:      2.5 inches
  13. Device is:        In smartctl database [for details use: -P show]
  14. ATA Version is:   ATA8-ACS T13/1699-D revision 6
  15. SATA Version is:  SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
  16. Local Time is:    Sun Dec  4 15:33:31 2016 CST
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled

  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED

  21. General SMART Values:
  22. Offline data collection status:  (0x00)        Offline data collection activity
  23.                                         was never started.
  24.                                         Auto Offline Data Collection: Disabled.
  25. Self-test execution status:      (   0)        The previous self-test routine completed
  26.                                         without error or no self-test has ever
  27.                                         been run.
  28. Total time to complete Offline
  29. data collection:                 (   45) seconds.
  30. Offline data collection
  31. capabilities:                          (0x5b) SMART execute Offline immediate.
  32.                                         Auto Offline data collection on/off support.
  33.                                         Suspend Offline collection upon new
  34.                                         command.
  35.                                         Offline surface scan supported.
  36.                                         Self-test supported.
  37.                                         No Conveyance Self-test supported.
  38.                                         Selective Self-test supported.
  39. SMART capabilities:            (0x0003)        Saves SMART data before entering
  40.                                         power-saving mode.
  41.                                         Supports SMART auto save timer.
  42. Error logging capability:        (0x01)        Error logging supported.
  43.                                         General Purpose Logging supported.
  44. Short self-test routine
  45. recommended polling time:          (   2) minutes.
  46. Extended self-test routine
  47. recommended polling time:          (  97) minutes.
  48. SCT capabilities:                (0x003d)        SCT Status supported.
  49.                                         SCT Error Recovery Control supported.
  50.                                         SCT Feature Control supported.
  51.                                         SCT Data Table supported.

  52. SMART Attributes Data Structure revision number: 16
  53. Vendor Specific SMART Attributes with Thresholds:
  54. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  55.   1 Raw_Read_Error_Rate     0x000b   100   100   062    Pre-fail  Always       -       0
  56.   2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0
  57.   3 Spin_Up_Time            0x0007   222   222   033    Pre-fail  Always       -       1
  58.   4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       25
  59.   5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  60.   7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  61.   8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0
  62.   9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       45
  63. 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
  64. 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       25
  65. 191 G-Sense_Error_Rate      0x000a   100   100   000    Old_age   Always       -       0
  66. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       2
  67. 193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       8163
  68. 194 Temperature_Celsius     0x0002   193   193   000    Old_age   Always       -       31 (Min/Max 8/38)
  69. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
  70. 197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
  71. 198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
  72. 199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
  73. 223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0

  74. SMART Error Log Version: 1
  75. No Errors Logged

  76. SMART Self-test log structure revision number 1
  77. No self-tests have been logged.  [To run self-tests, use: smartctl -t]

  78. SMART Selective self-test log data structure revision number 1
  79. SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  80.     1        0        0  Not_testing
  81.     2        0        0  Not_testing
  82.     3        0        0  Not_testing
  83.     4        0        0  Not_testing
  84.     5        0        0  Not_testing
  85. Selective self-test flags (0x0):
  86.   After scanning selected spans, do NOT read-scan remainder of disk.
  87. If Selective self-test is pending on power-up, resume after 0 minute delay.
Copy the Code



Reply Favorite View the author
All Replies
avatar
rdlg
deepin
2016-12-05 00:02
#1
磁盘响,一般都是磁盘出问题了,有坏道的可能性比较大
Reply View the author
avatar
ksliubaoming
deepin
2016-12-05 00:03
#2
https://bbs.deepin.org/post/132723
磁盘响,一般都是磁盘出问题了,有坏道的可能性比较大

也有可能是电源供电不足的问题
Reply View the author
avatar
xianmin
deepin
2016-12-05 01:27
#3
https://bbs.deepin.org/post/132723
磁盘响,一般都是磁盘出问题了,有坏道的可能性比较大

声音也没有很大,我还是昨晚夜深人静的时候才发现的。
是前两天刚换的新硬盘。
同一个磁盘,另外一个 Linux 系统没有就没有那么频繁的“滋滋滋滋”声。
我怀疑是不是电源管理配置上的问题……
Reply View the author
avatar
shea64
deepin
2016-12-05 01:31
#4
SSD保证没有
Reply View the author
avatar
xianmin
deepin
2016-12-05 01:39
#5

只有一块 500G 的机械硬盘
Reply View the author
avatar
shea64
deepin
2016-12-05 01:43
#6
https://bbs.deepin.org/post/132723
只有一块 500G 的机械硬盘

所以上一块
Reply View the author
avatar
随风
deepin
2016-12-05 03:01
#7
升级后出过这样的声音,不知是哪在响。
Reply View the author
avatar
comzhong
deepin
2016-12-05 04:16
#8
本帖最后由 comzhong 于 2016-12-4 20:30 编辑
https://bbs.deepin.org/post/132723
声音也没有很大,我还是昨晚夜深人静的时候才发现的。
是前两天刚换的新硬盘。
同一个磁盘,另外一个 Lin ...

呲呲声这是正常的,我最初买电脑的时候,晚上太安静,发现磁盘大量读写数据时就会很明显的呲呲声,我还特地去找售后啦!当然,某些品牌的声音会大点,我的用了5年才出现坏道(经常装系统),现在退休屏蔽掉做移动硬盘。没自己的电脑的时候都去网吧,想听到都难,其实硬盘都有(当然没说SSD),不过一般会被其它声音掩盖掉,除非夜深人静,又出现大量读写就会很明显了
至于频繁的话,看看什么程序在大量读写
硬盘健康状况偶尔看看S.M.A.R.T就好,没坏道就好,碎片的话,Windows半年到一年一次整理就差不多了,Linux暂时不管

Reply View the author
avatar
xianmin
deepin
2016-12-07 13:52
#9
https://bbs.deepin.org/post/132723
呲呲声这是正常的,我最初买电脑的时候,晚上太安静,发现磁盘大量读写数据时就会很明显的呲呲声,我还特 ...

感谢回复!我还在研究中……:)
Reply View the author