No sound, no HDMI detected on control center- Community

No sound, no HDMI detected on control center

Community Discussion 1137 views · 6 replies ·

kayoo

deepin

2016-07-29 08:31

Author

Edited by kayoo at 2016-7-29 00:37

Hello everyone,I have been trying to get audio to work on a Gibabyte Brix (GB-BSi3-6100) through HDMI but no go.
If I plug into the standard headphone jack audio works no problem.

I can't see anything HDMI related on "Control Center"
[attach]10547[/attach]

But if I go with CLI :

I'm part of "audio" group

$ id |grep audio

Copy the Code

uid=1000(jeremi) gid=1000(jeremi) groupes=1000(jeremi),4(adm),7(lp),24(cdrom),25(floppy),27(sudo),29(audio),44(video),46(plugdev),100(users),107(netdev),111(lpadmin),116(scanner)

And this is all the information I could gather :

$ sudo alsactl init

Copy the Code

alsactl: sysfs_init:48: sysfs path '/sys' is invalid

Found hardware: "HDA-Intel" "Realtek ALC255" "HDA:10ec0255,1458fa56,00100002 HDA:80862809,80860101,00100000" "0x1458" "0xfa56"
Hardware is initialized using a generic method

$ cat /proc/asound/version

Copy the Code

Advanced Linux Sound Architecture Driver Version k4.4.0-2-deepin-amd64.

$ cat /proc/asound/cards

Copy the Code

0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xdf140000 irq 129

$ cat /proc/asound/pcm

Copy the Code

00-00: ALC255 Analog : ALC255 Analog : playback 1 : capture 1
00-03: HDMI 0 : HDMI 0 : playback 1
00-07: HDMI 1 : HDMI 1 : playback 1
00-08: HDMI 2 : HDMI 2 : playback 1

$ cat /proc/asound/modules

Copy the Code

0 snd_hda_intel

$ aplay -l

Copy the Code

**** Liste des Périphériques Matériels PLAYBACK ****
carte 0: PCH [HDA Intel PCH], périphérique 0: ALC255 Analog [ALC255 Analog]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 0: PCH [HDA Intel PCH], périphérique 3: HDMI 0 [HDMI 0]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 0: PCH [HDA Intel PCH], périphérique 7: HDMI 1 [HDMI 1]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 0: PCH [HDA Intel PCH], périphérique 8: HDMI 2 [HDMI 2]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0

I heard some noise when I using "HDMI 1"

$ speaker-test -c 2 -r 48000 -D hw:0,7

Copy the Code

Have you anyclue on How activate HDMI-1 by default ?
And why Control Center is not detecting this chanel ?

Thanks for your help.

Reply Like 0 Favorite View the author

All Replies

kayoo

deepin

2016-07-29 09:24

Ok, I'm trying to us "pavucontrol" but this is not working

Pavu control center detect HDMI-2 has plugin.
After reboot, my Deepin control center show HDMI 2, but still nothing U_U

Reply Like 0 View the author

stevex

deepin

2016-07-29 10:26

Salut. Have a look at the post by "deviland" further down on this forum page called "Deepin 2015-HDMI audio problem" where installing pavucontrol solved the HDMi problem for some members.

Reply Like 0 View the author

kayoo

deepin

2016-07-29 10:37

Thanks, I have already install and try it without results...

See above.

Reply Like 0 View the author

kayoo

deepin

2016-08-02 03:16

no idea ?

Reply Like 0 View the author

merlinelmago

deepin

2016-09-07 02:51

I had exactly the same problem... As far as I've read on the Internet we are not the only ones.
The configuration options in the control center are insufficient. pavucontrol allowed me to control more exactly the audio output and solved the problem.

Regards
Merlin

Reply Like 0 View the author

kayoo

deepin

2016-09-08 07:27

Thx for your feedback...

This weekend I will give it another try.

Reply Like 0 View the author

New Thread

Popular Events